APPROVED VENDOR Flat Washer: M2 Screw Sz, Fiber Seal, 2.2 mm Inside Dia, 5 mm Outside Dia
The APPROVED VENDOR Flat Washer (SKU 894EM5, MPN Z8640) is a metric fiber seal for M2 screw sizes, supplied in a 10-pack. It has a 2.2 mm inside diameter, 5 mm outside diameter, and 0.3 mm max thickness. This red…
SKU 3G-OTH-534558
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Flat Washer (SKU 894EM5, MPN Z8640) is a metric fiber seal for M2 screw sizes, supplied in a 10-pack. It has a 2.2 mm inside diameter, 5 mm outside diameter, and 0.3 mm max thickness. This red fiber washer is not FDA approved and not metal detectable.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the APPROVED VENDOR Z8640 flat washer used for?
The APPROVED VENDOR Z8640 flat washer is a fiber seal for M2 metric screws. It provides a non-metallic, compressible barrier to prevent leakage or vibration loosening in light-duty industrial assemblies. Common in instrumentation, pneumatics, and low-pressure fluid systems where metal-detectable or FDA-rated materials are not required.
What are the specifications of the APPROVED VENDOR Z8640 flat washer?
The APPROVED VENDOR Z8640 flat washer has a 2.2 mm inside diameter, 5 mm outside diameter, and 0.3 mm max thickness. It is a metric fiber seal for M2 screw sizes, supplied in a 10-pack. The red fiber material is not FDA approved and not metal detectable.
Where to buy the APPROVED VENDOR Z8640 flat washer worldwide?
3G Electric supplies the APPROVED VENDOR Z8640 flat washer worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us for a quote on this 10-pack fiber seal for M2 screws.
How to install the APPROVED VENDOR Z8640 fiber flat washer?
Place the APPROVED VENDOR Z8640 fiber washer under the head of an M2 screw before tightening. Ensure the mating surfaces are clean and dry. Tighten to the torque specified for your assembly; fiber washers compress slightly to form a seal. Do not overtighten, as fiber material may crush.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR single-piece sealing washers. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
