APPROVED VENDOR Flat Washer: M24 Screw Sz, Fiber Seal, 25 mm Inside Dia, 44 mm Outside Dia
The APPROVED VENDOR Flat Washer (SKU 894EN6) is a metric M24 screw-size fiber seal, supplied as a 5-pack. It features a 25 mm inside diameter, 44 mm outside diameter, and 4 mm maximum thickness. This red fiber washer…
SKU 3G-OTH-534501
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Flat Washer (SKU 894EN6) is a metric M24 screw-size fiber seal, supplied as a 5-pack. It features a 25 mm inside diameter, 44 mm outside diameter, and 4 mm maximum thickness. This red fiber washer is not FDA approved and not metal detectable.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the APPROVED VENDOR M24 fiber flat washer used for?
This fiber flat washer seals around M24 metric fasteners in industrial piping, hydraulic, and pneumatic systems. It prevents fluid or gas leakage under compression. The red fiber material suits non-FDA applications where metal-detectable parts are not required.
What are the specifications of the APPROVED VENDOR Z8651 flat washer?
The APPROVED VENDOR Z8651 is a metric M24 fiber seal flat washer with a 25 mm inside diameter, 44 mm outside diameter, and 4 mm maximum thickness. It is supplied as a 5-pack, is not FDA approved, and is not metal detectable.
Where to buy the APPROVED VENDOR Z8651 flat washer worldwide?
3G Electric supplies the APPROVED VENDOR Z8651 fiber flat washer worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this 5-pack of M24 fiber seals.
How to install the APPROVED VENDOR fiber flat washer?
Place the fiber washer over the M24 bolt or stud before tightening. Ensure the sealing surfaces are clean and free of debris. Tighten to the manufacturer's torque specification for the joint. Fiber washers compress to form a seal but should not be overtightened.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR single-piece sealing washers. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.





