OEM Diameter Tape: Knob Tip, Metal/Stainless Steel, Black
APPROVED VENDOR pita ukur diameter (Diameter Tape) dengan ujung knob (Knob Tip) berbahan logam/stainless steel dan warna hitam. Alat ukur ini menggunakan skala inci (Inch) dengan sistem SAE/Diameter, mekanisme…
SKU 3G-OTH-316331
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Local availability & support — Indonesia
- Phone
- +65 8878 8355
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
APPROVED VENDOR pita ukur diameter (Diameter Tape) dengan ujung knob (Knob Tip) berbahan logam/stainless steel dan warna hitam. Alat ukur ini menggunakan skala inci (Inch) dengan sistem SAE/Diameter, mekanisme non-locking, dan memiliki panjang ukur dalam satuan inci. Pita ukur ini tidak memiliki rating keselamatan khusus (Not Rated) dan cocok untuk aplikasi pengukuran diameter di lingkungan industri.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
Untuk apa pita ukur diameter APPROVED VENDOR digunakan?
Pita ukur diameter APPROVED VENDOR dengan ujung knob (Knob Tip) digunakan untuk mengukur diameter benda berbentuk silinder atau lingkaran secara langsung dalam satuan inci. Skala SAE/Diameter memudahkan pembacaan diameter tanpa perlu perhitungan tambahan. Cocok untuk aplikasi perawatan dan fabrikasi di industri.
Apa spesifikasi pita ukur diameter APPROVED VENDOR 5DNU8?
Spesifikasi pita ukur diameter APPROVED VENDOR model 5DNU8 meliputi: skala inci (Inch) dengan sistem SAE/Diameter, ujung knob (Knob Tip) dari logam/stainless steel, warna hitam, mekanisme non-locking, dan tidak memiliki rating keselamatan (Not Rated). Panjang ukur dalam satuan inci.
Di mana beli pita ukur diameter APPROVED VENDOR di Indonesia?
Anda dapat membeli pita ukur diameter APPROVED VENDOR model 5DNU8 melalui 3G Electric, distributor resmi yang memasok dan mengirimkan peralatan industri ke seluruh Indonesia. Kami menangani logistik dan kepabeanan untuk memastikan produk sampai ke lokasi Anda.
Bagaimana cara memilih pita ukur diameter yang tepat?
Pilih pita ukur diameter dengan skala yang sesuai, seperti SAE/Diameter dalam inci dari APPROVED VENDOR. Pastikan ujung knob (Knob Tip) cocok untuk aplikasi Anda. Untuk pengukuran diameter yang akurat, gunakan pita dengan mekanisme non-locking seperti model 5DNU8.
OEM Produk
3G Electric memasok OEM diameter-scale tape measures. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
Anda mungkin juga membutuhkan
Related products
- DUCTMATE Round duct connector clamp for 18-inch round spiral ductwork. Features a steel base, neoprene fabric, and polyethylene seal with a double-bolt connection. Dimensions: 3 1/2 inches long by 18 inches wide. Color: silver
- DUCTMATE Round duct connector clamp for joining sections of 16-inch round spiral ductwork in HVAC and ventilation systems. Constructed with a steel base, silver finish, neoprene fabric seal, and polyethylene seal material. Uses a double-bolt connection for secure assembly. Dimensions: 3 1/2 inches length, 16 inches width
- RULAND MANUFACTURING Double disc coupling for round shafts with clamp-on design. Bore diameters: 1 in and 25 mm. Outer diameter: 2 3/4 in. Constructed with two aluminum discs and a center spacer, stainless steel hardware. Used to connect shafts of different sizes while accommodating misalignment in motion control and automation equipment
- RULAND MANUFACTURING Double disc coupling with clamp-on hubs for connecting round shafts of 1-1/4 in and 30 mm diameters. Features aluminum hubs and stainless steel discs with a center spacer. Outer diameter is 2-3/4 in. Used in motion control and automation equipment to transmit torque while accommodating misalignment
- RULAND MANUFACTURING Double disc coupling for round shafts with a 1 1/4 in x 25 mm bore diameter and 2 3/4 in outer diameter. Features a round, clamp-on design with an aluminum hub and center spacer, and stainless steel discs. Accommodates inch to metric bore dimensions with different bore sizes. Used to connect two round shafts while accommodating misalignment in motion control, packaging, and automation equipment
- RULAND MANUFACTURING Double disc coupling for connecting two round shafts with bore diameters of 35 mm and 1-1/4 in. Features a round clamp-on design with an aluminum hub and center spacer, and stainless steel discs. Accommodates inch to metric bore dimensions. Used in motion control, packaging, and automation equipment for precision torque transmission and zero backlash