BANJO Bulkhead Tank Fitting: Glass Reinforced Polypropylene Body
The BANJO Bulkhead Tank Fitting is a glass reinforced polypropylene through-wall fitting with a 1 in Female NPT threaded inside connection (MPN TF100). This polypropylene fitting provides a reliable solution for tank…
SKU 3G-OTH-477116
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BANJO Bulkhead Tank Fitting is a glass reinforced polypropylene through-wall fitting with a 1 in Female NPT threaded inside connection (MPN TF100). This polypropylene fitting provides a reliable solution for tank wall penetrations, backed by 3G Electric's specialist expertise in pumps and controls across 14 industrial departments.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a BANJO Bulkhead Tank Fitting used for?
A BANJO Bulkhead Tank Fitting is used to create a sealed, leak-proof connection through a tank wall for fluid transfer. It is commonly applied in industrial pumping systems, chemical storage, and water treatment where a reliable polypropylene through-wall fitting is required.
What are the specifications of the BANJO TF100 bulkhead fitting?
The BANJO TF100 bulkhead tank fitting is made of glass reinforced polypropylene. It has a 1 in female NPT threaded inside connection. This material offers corrosion resistance for many industrial fluids. 3G Electric supplies this fitting as part of its specialist pumps and controls portfolio.
Where to buy BANJO bulkhead tank fittings worldwide?
3G Electric supplies BANJO bulkhead tank fittings worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source genuine BANJO parts like the TF100 and support your procurement across 14 industrial departments.
How to install a BANJO polypropylene bulkhead fitting?
To install a BANJO polypropylene bulkhead fitting, drill a clean hole in the tank wall, insert the fitting from the outside, and tighten the locknut from inside. Use a compatible gasket for sealing. Avoid over-torquing to prevent cracking the polypropylene. 3G Electric can advise on proper selection for your application.
Digunakan dalam
Aplikasi umum untuk BANJOBANJO Produk
3G Electric memasok BANJO polypropylene through-wall fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
