BANJO Pipe Cap: Polypropylene Body
The BANJO Pipe Cap (MPN VC300) is a swirl-prevention cap with a polypropylene body and a 3 in male NPT threaded inside connection. 3G Electric interprets your demand for this genuine industrial fitting, sourcing it…
SKU 3G-OTH-455029
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BANJO Pipe Cap (MPN VC300) is a swirl-prevention cap with a polypropylene body and a 3 in male NPT threaded inside connection. 3G Electric interprets your demand for this genuine industrial fitting, sourcing it across 14 departments—and far more—with specialist depth in pumps and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a BANJO Pipe Cap used for?
The BANJO Pipe Cap (VC300) is a swirl-prevention cap used in industrial piping systems to reduce turbulence and prevent vortex formation in pump inlets and tank outlets. It is commonly applied in water, chemical, and fluid-handling applications where smooth flow is critical.
What are the specifications of the BANJO Pipe Cap VC300?
The BANJO Pipe Cap VC300 has a polypropylene body with a 3 in male NPT threaded inside connection. It is designed for swirl prevention in fluid systems. The manufacturer part number is VC300, and the fitting material is polypropylene, offering corrosion resistance for many industrial fluids.
Where to buy a BANJO Pipe Cap VC300 worldwide?
3G Electric supplies the genuine BANJO Pipe Cap VC300 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source this fitting across 14 departments, with specialist depth in pumps and controls.
How to install a BANJO Pipe Cap with male NPT threads?
Apply a compatible thread sealant or PTFE tape to the 3 in male NPT threads of the BANJO Pipe Cap. Hand-tighten into the female NPT port, then use a wrench for an additional 1-2 turns to achieve a leak-free seal. Avoid over-tightening to prevent stress on the polypropylene body.
Digunakan dalam
Aplikasi umum untuk BANJOBANJO Produk
3G Electric memasok BANJO swirl-prevention caps. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
