BECK Pipe Nipple: 1/8 in Nominal Pipe Size, 10 1/2 in Lg, Schedule 40, Galvanized Steel
The BECK Pipe Nipple (SKU 29VF62) is a Schedule 40, galvanized steel, welded pipe nipple with a 1/8 in nominal pipe size and 10 1/2 in length. It features Male NPT x Male NPT connections, is threaded on both ends…
SKU 3G-OTH-473232
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BECK Pipe Nipple (SKU 29VF62) is a Schedule 40, galvanized steel, welded pipe nipple with a 1/8 in nominal pipe size and 10 1/2 in length. It features Male NPT x Male NPT connections, is threaded on both ends, and has a maximum operating pressure of 150 psi @ 150°F. Made in the USA (MPN 0331004002), this component is supplied by 3G Electric across 14 industrial departments, with specialist depth in combustion, pumps and controls.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a BECK pipe nipple used for?
A BECK pipe nipple connects two male NPT fittings in industrial piping systems for air, water, or low-pressure steam. It is commonly used in combustion, pumps, and controls applications where a short, threaded galvanized steel section is needed. 3G Electric supplies this component across 14 industrial departments.
What are the specifications of the BECK pipe nipple 0331004002?
The BECK pipe nipple (MPN 0331004002) has a 1/8 in nominal pipe size, 10 1/2 in length, Schedule 40 wall, galvanized steel construction, and welded seam. It features Male NPT x Male NPT connections with a maximum operating pressure of 150 psi @ 150°F. Made in the USA.
Where to buy a BECK pipe nipple worldwide?
3G Electric supplies the BECK pipe nipple (SKU 29VF62) to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source and deliver genuine BECK components across 14 departments, including combustion, pumps, and controls.
How to install a BECK galvanized steel pipe nipple?
Apply pipe thread sealant or PTFE tape to the male NPT threads before installation. Hand-tighten the nipple into the female fitting, then use a wrench for an additional 1-2 turns. Avoid overtightening to prevent thread damage. For the BECK nipple rated at 150 psi @ 150°F, ensure system pressure and temperature remain within limits.
Digunakan dalam
Aplikasi umum untuk BECKBECK Produk
3G Electric memasok BECK schedule 40 threaded on both ends pipe & pipe nipples. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
