BECK Pipe Nipple: 3/4 in Nominal Pipe Size, 10 1/2 in Lg, Schedule 40, Galvanized Steel
The BECK Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 3/4 in nominal pipe size and 10 1/2 in length. It features Male NPT x Male NPT connections on both ends, with a maximum operating…
SKU 3G-OTH-473281
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BECK Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 3/4 in nominal pipe size and 10 1/2 in length. It features Male NPT x Male NPT connections on both ends, with a maximum operating pressure of 150 psi @ 150°F. Made in the USA, this component is part of our broader industrial supply across 14 departments, with specialist depth in combustion, pumps, and controls.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a BECK 3/4 in Schedule 40 galvanized pipe nipple used for?
This BECK pipe nipple connects two male NPT threaded fittings in industrial piping systems for water, air, or low-pressure steam. It is commonly used in plumbing, HVAC, and process lines across 14 industrial departments, with specialist depth in combustion, pumps, and controls.
What are the specifications of the BECK 0331022806 pipe nipple?
The BECK pipe nipple has a 3/4 in nominal pipe size, 10 1/2 in length, Schedule 40 wall, galvanized steel construction, and welded seam. It features Male NPT x Male NPT connections, with a maximum operating pressure of 150 psi @ 150°F. Made in the USA.
Where to buy a BECK pipe nipple worldwide?
3G Electric supplies the BECK 0331022806 pipe nipple to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source genuine components across 14 departments, including combustion, pumps, and controls.
How to install a BECK galvanized steel pipe nipple?
Apply pipe thread sealant or PTFE tape to the male NPT threads. Hand-tighten the nipple into the female fitting, then use wrenches on the nipple's hex section for final tightening—avoid overtightening to prevent thread damage. Ensure the system is depressurized before installation.
Digunakan dalam
Aplikasi umum untuk BECKBECK Produk
3G Electric memasok BECK schedule 40 threaded on both ends pipe & pipe nipples. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
