BECK Pipe Nipple: 1 in Nominal Pipe Size, 9 1/2 in Lg, Schedule 40, Galvanized Steel
The BECK Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1 in nominal pipe size and 9 1/2 in length. It features Male NPT x Male NPT connections, a maximum operating pressure of 150 psi @…
SKU 3G-OTH-473436
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BECK Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1 in nominal pipe size and 9 1/2 in length. It features Male NPT x Male NPT connections, a maximum operating pressure of 150 psi @ 150°F, and is made in the USA (MPN 0331026807).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a BECK Schedule 40 galvanized pipe nipple used for?
This BECK pipe nipple connects two male NPT threaded fittings in industrial plumbing, compressed air, or water systems. Its galvanized steel resists corrosion in moderate environments, and the 150 psi @ 150°F rating suits low-pressure lines. 3G Electric supplies this USA-made nipple for maintenance or new builds.
What are the specifications of the BECK 0331026807 pipe nipple?
The BECK pipe nipple has a 1 in nominal pipe size, 9 1/2 in length, Schedule 40 wall, galvanized steel construction, and welded seam. It uses Male NPT x Male NPT connections, with a maximum operating pressure of 150 psi @ 150°F. Made in USA, MPN 0331026807.
Where to buy a BECK pipe nipple worldwide?
3G Electric sources and delivers the BECK Schedule 40 galvanized pipe nipple to worldwide locations. We handle full logistics and customs clearance as a global industrial supplier. Contact us for pricing and lead time on this USA-made, 1 in NPT nipple.
How to install a BECK galvanized pipe nipple?
Apply pipe thread sealant or PTFE tape to the male NPT threads. Hand-tighten the nipple into the female fitting, then use a wrench for an additional 1-2 turns. Avoid overtightening to prevent stress on the Schedule 40 wall. For 150 psi systems, verify joint integrity before pressurizing.
Digunakan dalam
Aplikasi umum untuk BECKBECK Produk
3G Electric memasok BECK schedule 40 threaded on both ends pipe & pipe nipples. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
