BECK Pipe Nipple: 6 in Nominal Pipe Size, 7 in Lg, Schedule 40, Galvanized Steel
The BECK Pipe Nipple (SKU 29VJ37, MPN 0331062208) is a Schedule 40, galvanized steel nipple with a 6-inch nominal pipe size and 7-inch length, threaded on both ends with Male NPT x Male NPT connections. It has a…
SKU 3G-OTH-473225
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BECK Pipe Nipple (SKU 29VJ37, MPN 0331062208) is a Schedule 40, galvanized steel nipple with a 6-inch nominal pipe size and 7-inch length, threaded on both ends with Male NPT x Male NPT connections. It has a maximum operating pressure of 150 psi at 150°F and is made in the USA.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a BECK Schedule 40 galvanized pipe nipple used for?
A BECK Schedule 40 galvanized pipe nipple connects two male NPT fittings in industrial plumbing, compressed air, or water systems. Its galvanized steel resists corrosion, and the 150 psi rating at 150°F suits moderate-pressure applications. 3G Electric supplies this nipple across 14 industrial departments.
What are the specifications of the BECK 0331062208 pipe nipple?
The BECK 0331062208 pipe nipple has a 6-inch nominal pipe size, 7-inch length, Schedule 40 wall, galvanized steel construction, and Male NPT x Male NPT threads. Maximum operating pressure is 150 psi at 150°F. It is made in the USA. 3G Electric sources this genuine BECK component globally.
Where to buy a BECK pipe nipple worldwide?
3G Electric supplies the BECK pipe nipple (MPN 0331062208) to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we interpret your demand and deliver genuine BECK components across 14 departments.
How to install a BECK galvanized pipe nipple?
Apply pipe thread sealant or PTFE tape to both male NPT ends. Hand-tighten the nipple into the female fitting, then use wrenches on the nipple's hex section for final torque—avoid over-tightening to prevent thread damage. 3G Electric provides technical support for proper installation.
Digunakan dalam
Aplikasi umum untuk BECKBECK Produk
3G Electric memasok BECK schedule 40 threaded on both ends pipe & pipe nipples. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
