BELL & GOSSETT Circulating Pump Coupler: Mfr Part # 118474
The BELL & GOSSETT Circulating Pump Coupler, manufacturer part number 118474, is a cast-iron motor coupler designed for use with Bell & Gossett E-60 series circulator pumps. It is compatible with Grainger part number…
SKU 3G-OTH-83409
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BELL & GOSSETT Circulating Pump Coupler, manufacturer part number 118474, is a cast-iron motor coupler designed for use with Bell & Gossett E-60 series circulator pumps. It is compatible with Grainger part number 4RD14 and manufacturer model number 105089.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the BELL & GOSSETT circulating pump coupler used for?
The BELL & GOSSETT circulating pump coupler (part 118474) connects the motor shaft to the pump shaft in Bell & Gossett E-60 series circulator pumps. It transmits torque to drive the impeller in hydronic heating and cooling systems, ensuring reliable fluid circulation in commercial and industrial HVAC applications.
What are the specifications of the BELL & GOSSETT 118474 coupler?
The BELL & GOSSETT 118474 coupler is made of cast iron and is compatible with Bell & Gossett E-60 series circulator pumps. It also matches Grainger part number 4RD14 and manufacturer model number 105089. This motor coupler is designed for direct replacement in existing pump assemblies.
Where to buy the BELL & GOSSETT 118474 coupler worldwide?
3G Electric supplies the BELL & GOSSETT 118474 coupler worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time; we source and deliver this cast-iron coupler to any international destination.
How to install the BELL & GOSSETT 118474 pump coupler?
To install the BELL & GOSSETT 118474 coupler, first disconnect power and drain the system. Align the motor and pump shafts, then slide the cast-iron coupler onto both shafts. Secure it with the set screws, ensuring proper alignment to avoid vibration. Reassemble the pump housing, refill the system, and test operation.
Digunakan dalam
Aplikasi umum untuk BELLBELL Produk
3G Electric memasok BELL motor couplers for circulator pumps. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
