BENEDICT GMBH Solar Safety Disconnect Switch: Non-Fusible, 16 A, 600V DC
The BENEDICT GMBH Solar Safety Disconnect Switch: Non-Fusible (MPN LS16 PFLH4 A2) is a single-phase, non-fusible disconnect switch rated at 16 A and 600V DC. Designed for indoor/outdoor use, this switch does not…
SKU 3G-OTH-28631
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BENEDICT GMBH Solar Safety Disconnect Switch: Non-Fusible (MPN LS16 PFLH4 A2) is a single-phase, non-fusible disconnect switch rated at 16 A and 600V DC. Designed for indoor/outdoor use, this switch does not carry UL 98B certification. It provides a straightforward disconnection solution for solar applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the BENEDICT GMBH Solar Safety Disconnect Switch used for?
The BENEDICT GMBH Solar Safety Disconnect Switch (MPN LS16 PFLH4 A2) is used to safely isolate DC circuits in photovoltaic systems. It provides a manual disconnection point for solar arrays, enabling maintenance or emergency shutdown. Rated at 16 A and 600V DC, it is suitable for indoor or outdoor installation in commercial and residential solar applications.
What are the specifications of the BENEDICT GMBH LS16 PFLH4 A2 disconnect switch?
The BENEDICT GMBH LS16 PFLH4 A2 is a non-fusible, single-phase disconnect switch rated at 16 A and 600V DC. It is designed for indoor/outdoor use and does not carry UL 98B certification. The switch provides a reliable disconnection solution for solar DC circuits, with a compact form factor suitable for panel mounting.
Where to buy the BENEDICT GMBH Solar Safety Disconnect Switch worldwide?
3G Electric supplies the BENEDICT GMBH Solar Safety Disconnect Switch (LS16 PFLH4 A2) worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time; we source and deliver this switch to any country.
How to install the BENEDICT GMBH non-fusible disconnect switch?
Install the BENEDICT GMBH LS16 PFLH4 A2 switch by mounting it in a suitable enclosure for indoor or outdoor use. Ensure the DC circuit is de-energized before wiring. Connect the solar array positive and negative lines to the switch terminals, following local electrical codes. Always verify voltage (600V DC max) and current (16 A) ratings before operation.
Digunakan dalam
Aplikasi umum untuk BENEDICT GMBHBENEDICT GMBH Produk
3G Electric memasok BENEDICT GMBH non-fusible disconnect switches. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
