BOSCH 2-1/2" 20 Deg 16g Finish Nailss
The BOSCH GNH16G250GV is a 2-1/2" 20-degree 16-gauge galvanized finish nail with a chisel point, part of the collated trim, pin, finishing, and brad nails category. 3G Electric interprets customer demand and delivers…
SKU 3G-OTH-525648
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BOSCH GNH16G250GV is a 2-1/2" 20-degree 16-gauge galvanized finish nail with a chisel point, part of the collated trim, pin, finishing, and brad nails category. 3G Electric interprets customer demand and delivers genuine industrial equipment across 14 departments, with specialist depth in combustion, pumps, and controls as an authorized distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the BOSCH GNH16G250GV finish nail used for?
The BOSCH GNH16G250GV is a 2-1/2" 20-degree 16-gauge galvanized finish nail with a chisel point, designed for trim, finishing, and brad nailing applications. It is commonly used in woodworking, cabinetry, and interior trim work where a corrosion-resistant galvanized coating is needed.
What are the specifications of the BOSCH GNH16G250GV?
The BOSCH GNH16G250GV is a 2-1/2" long, 20-degree collated finish nail in 16-gauge with a chisel point. It is galvanized for corrosion resistance. The manufacturer part number is GNH16G250GV, and it is part of the collated trim, pin, finishing, and brad nails category.
Where to buy BOSCH GNH16G250GV finish nails worldwide?
3G Electric supplies the BOSCH GNH16G250GV finish nails worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your location. Contact us to source this genuine BOSCH part for your finishing applications.
How to select the right finish nail for a trim project?
Select a finish nail based on material thickness and required holding strength. For trim work, a 16-gauge nail like the BOSCH GNH16G250GV offers good holding power with minimal splitting. The 2-1/2" length suits thicker trim, while the chisel point helps reduce surface damage. Always match nail angle to your nailer.
Digunakan dalam
Aplikasi umum untuk BOSCHBOSCH Produk
3G Electric memasok BOSCH collated trim, pin, finishing, & brad nails. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
