BRAD HARRISON Cordset: M12 Male Straight X Bare Wire, 3 Pins, Yellow, PVC, 5 m Cable Lg
The BRAD HARRISON Cordset is a single-ended cordset with a PVC jacket for flexing applications, featuring an M12 male straight connector on one end and bare wire on the other. It has 3 pins, a 5 m cable length, 22…
SKU 3G-OTH-51255
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BRAD HARRISON Cordset is a single-ended cordset with a PVC jacket for flexing applications, featuring an M12 male straight connector on one end and bare wire on the other. It has 3 pins, a 5 m cable length, 22 AWG wire size, and a maximum current of 4 A. The yellow PVC cable jacket provides IP65 and NEMA 6P ratings.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the BRAD HARRISON 803006A09M050 cordset used for?
This single-ended cordset connects M12 male sensors or actuators to controllers via bare wire, ideal for flexing applications in industrial automation, packaging, and material handling. The yellow PVC jacket with IP65 and NEMA 6P ratings protects against dust, oil, and water spray.
What are the specifications of the BRAD HARRISON M12 cordset?
The cordset has 3 pins, 22 AWG wire, 5 m cable length, 4 A max current, and a yellow PVC jacket. It features an M12 male straight connector on one end and bare wire on the other, rated IP65 and NEMA 6P for harsh environments.
Where to buy BRAD HARRISON cordsets worldwide?
3G Electric supplies the BRAD HARRISON 803006A09M050 cordset worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us for pricing and lead time on this M12 male-to-bare-wire cordset.
How to install a BRAD HARRISON M12 cordset with bare wire?
Connect the M12 male end to the sensor or actuator port, then terminate the bare wires into a controller terminal block per the wiring diagram. Ensure the cable is routed without sharp bends to maintain flex life. Tighten the M12 coupling nut by hand to achieve IP65 sealing.
Digunakan dalam
Aplikasi umum untuk BRAD HARRISONBRAD HARRISON Produk
3G Electric memasok BRAD HARRISON single-ended cordsets with pvc jacket for flexing applications. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.















