BRENNAN INDUSTRIES Compression Tube Straight: 10 mm OD x 6 mm OD size
The BRENNAN INDUSTRIES Compression Tube Straight (SKU 427RF0) is a Metric Flareless Bite Type Stainless Steel Compression Fitting with a 10 mm OD x 6 mm OD size and M16X1.5 x M12X1.5 thread size. Part of the…
SKU 3G-OTH-470771
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BRENNAN INDUSTRIES Compression Tube Straight (SKU 427RF0) is a Metric Flareless Bite Type Stainless Steel Compression Fitting with a 10 mm OD x 6 mm OD size and M16X1.5 x M12X1.5 thread size. Part of the D2403-EQUAL series (MPN D2403-L10-L06-SS), this fitting is designed for connecting tubing in industrial fluid systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a BRENNAN INDUSTRIES compression tube straight fitting used for?
This metric flareless bite type stainless steel compression fitting connects 10 mm OD to 6 mm OD tubing in industrial fluid systems. It is commonly used in hydraulic, pneumatic, and instrumentation applications where a leak-tight, vibration-resistant joint is required.
What are the specifications of the BRENNAN INDUSTRIES D2403-L10-L06-SS?
The BRENNAN INDUSTRIES D2403-L10-L06-SS is a metric flareless bite type stainless steel compression fitting. It has a 10 mm OD x 6 mm OD tube size, M16X1.5 x M12X1.5 thread size, and is part of the D2403-EQUAL series.
Where to buy BRENNAN INDUSTRIES compression fittings worldwide?
3G Electric supplies and delivers BRENNAN INDUSTRIES compression fittings worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure your order arrives at your facility, wherever it is located.
How to install a BRENNAN INDUSTRIES flareless bite type compression fitting?
Insert the tube fully into the fitting until it bottoms out, then tighten the nut finger-tight. Mark the nut position, then tighten an additional 1 to 1.25 turns with a wrench to set the bite ring. Always follow the manufacturer's instructions for torque and tube support.
BRENNAN INDUSTRIES Produk
3G Electric memasok BRENNAN INDUSTRIES metric flareless bite type stainless steel compressin fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
