BRENNAN INDUSTRIES Compression Tube Straight: 38 mm OD x 38 mm OD size
The BRENNAN INDUSTRIES Compression Tube Straight is a Metric Flareless Bite Type Stainless Steel Compression Fitting, Series D2403-EQUAL, with a Compression x Compression configuration for 38 mm OD x 38 mm OD tubing…
SKU 3G-OTH-470781
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BRENNAN INDUSTRIES Compression Tube Straight is a Metric Flareless Bite Type Stainless Steel Compression Fitting, Series D2403-EQUAL, with a Compression x Compression configuration for 38 mm OD x 38 mm OD tubing (MPN D2403-S38-S38-SS).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a BRENNAN INDUSTRIES compression tube straight fitting used for?
This metric flareless bite type stainless steel compression fitting connects two 38 mm OD tubes in a straight line. It is used in hydraulic, pneumatic, and instrumentation systems where a leak-proof, high-pressure seal is required without flaring the tube end.
What are the specifications of the BRENNAN INDUSTRIES D2403-S38-S38-SS?
The BRENNAN INDUSTRIES D2403-S38-S38-SS is a Series D2403-EQUAL compression tube straight. It has a Compression x Compression configuration for 38 mm OD x 38 mm OD tubing. The fitting is made of stainless steel and uses a metric flareless bite type design.
Where to buy BRENNAN INDUSTRIES compression fittings in worldwide?
3G Electric supplies BRENNAN INDUSTRIES compression fittings worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this D2403-S38-S38-SS fitting.
How to install a BRENNAN INDUSTRIES metric flareless bite type fitting?
Insert the tube fully into the fitting until it bottoms out. Tighten the nut by hand, then use a wrench to tighten according to the manufacturer's torque specifications. Over-tightening can damage the bite ring. Always verify the tube OD matches 38 mm before assembly.
BRENNAN INDUSTRIES Produk
3G Electric memasok BRENNAN INDUSTRIES metric flareless bite type stainless steel compressin fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
