BRENNAN INDUSTRIES Compression Tube Straight: 20 mm OD x 12 mm OD x 3/4 in Pipe Size, Steel
The BRENNAN INDUSTRIES Compression Tube Straight is a flareless bite-type steel compression fitting from the D2404 series (MPN D2404-S20-12). It accommodates a 20 mm OD tube and a 12 mm OD tube with a 3/4 in pipe…
SKU 3G-OTH-470151
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BRENNAN INDUSTRIES Compression Tube Straight is a flareless bite-type steel compression fitting from the D2404 series (MPN D2404-S20-12). It accommodates a 20 mm OD tube and a 12 mm OD tube with a 3/4 in pipe size, constructed from rigid steel.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a BRENNAN INDUSTRIES compression tube straight used for?
A BRENNAN INDUSTRIES compression tube straight connects two tubes of different diameters in a rigid steel hydraulic or pneumatic system. It is used in industrial fluid power applications where a leak-tight, flareless bite-type joint is required, such as in machining, material handling, or power transmission equipment.
What are the specifications of the BRENNAN INDUSTRIES D2404-S20-12?
The BRENNAN INDUSTRIES D2404-S20-12 is a flareless bite-type steel compression fitting from the D2404 series. It accommodates a 20 mm OD tube and a 12 mm OD tube with a 3/4 in pipe size. The fitting is constructed from rigid steel and is designed for high-pressure industrial applications.
Where to buy BRENNAN INDUSTRIES compression fittings worldwide?
3G Electric supplies BRENNAN INDUSTRIES compression fittings worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to source the D2404-S20-12 or other BRENNAN INDUSTRIES components for your fluid power system.
How to install a flareless bite-type steel compression fitting?
To install a BRENNAN INDUSTRIES flareless bite-type fitting, cut the tube square, deburr, and insert it fully into the fitting. Tighten the nut by hand, then use a wrench to turn the nut the specified number of flats per the manufacturer's instructions. Over-tightening can damage the bite ring and cause leaks.
BRENNAN INDUSTRIES Produk
3G Electric memasok BRENNAN INDUSTRIES flareless bite-type steel compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
