BRENNAN INDUSTRIES Compression Elbow: 10 mm OD x 10 mm OD Size, M16X1.5 x M16X1.5 Thread Size
The BRENNAN INDUSTRIES Compression Elbow is a flareless bite-type steel compression fitting with 10 mm OD x 10 mm OD size and M16X1.5 x M16X1.5 thread size, part of the D2701-LN series (MPN D2701-LN-L10-L10).
SKU 3G-OTH-470054
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BRENNAN INDUSTRIES Compression Elbow is a flareless bite-type steel compression fitting with 10 mm OD x 10 mm OD size and M16X1.5 x M16X1.5 thread size, part of the D2701-LN series (MPN D2701-LN-L10-L10).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a BRENNAN INDUSTRIES compression elbow used for?
This flareless bite-type steel compression elbow connects two 10 mm OD tubes at a 90° angle in hydraulic or pneumatic systems. It is used in industrial fluid power applications where a leak-tight, vibration-resistant joint is required, such as in machining, material handling, or power transmission equipment.
What are the specifications of the BRENNAN INDUSTRIES D2701-LN-L10-L10?
The BRENNAN INDUSTRIES D2701-LN-L10-L10 is a flareless bite-type steel compression elbow with 10 mm OD x 10 mm OD tube size and M16X1.5 x M16X1.5 thread size. It is part of the D2701-LN series and is made of steel for durability in high-pressure fluid systems.
Where to buy BRENNAN INDUSTRIES compression fittings worldwide?
3G Electric supplies BRENNAN INDUSTRIES compression fittings like the D2701-LN-L10-L10 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote on this or any other industrial fitting you need sourced and delivered globally.
How to install a flareless bite-type compression elbow?
To install a BRENNAN INDUSTRIES flareless bite-type compression elbow, cut the tube square, deburr, and insert it fully into the fitting. Tighten the nut to the manufacturer's recommended torque to allow the ferrule to bite into the tube. Over-tightening can damage the seal; always follow standard hydraulic fitting practices.
BRENNAN INDUSTRIES Produk
3G Electric memasok BRENNAN INDUSTRIES flareless bite-type steel compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
