BRENNAN INDUSTRIES Compression Elbow: 6 mm OD x 6 mm OD Size, M12X1.5 x M12X1.5 Thread Size
The BRENNAN INDUSTRIES Compression Elbow is a flareless bite-type steel compression fitting with 6 mm OD x 6 mm OD size, M12X1.5 x M12X1.5 thread size, part of the D6500 series (MPN D6500-L06-L06).
SKU 3G-OTH-470057
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BRENNAN INDUSTRIES Compression Elbow is a flareless bite-type steel compression fitting with 6 mm OD x 6 mm OD size, M12X1.5 x M12X1.5 thread size, part of the D6500 series (MPN D6500-L06-L06).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a BRENNAN INDUSTRIES D6500 compression elbow used for?
This flareless bite-type steel compression elbow connects two 6 mm OD tubes at a 90° angle in hydraulic or pneumatic systems. It is used in industrial fluid power applications where a leak-tight, vibration-resistant joint is required, such as in machine tools or mobile equipment.
What are the specifications of the BRENNAN INDUSTRIES D6500-L06-L06?
The BRENNAN INDUSTRIES D6500-L06-L06 is a steel compression elbow with 6 mm OD x 6 mm OD tube size and M12X1.5 x M12X1.5 thread size. It is part of the D6500 series and uses a flareless bite-type design for reliable sealing without flaring the tube.
Where to buy BRENNAN INDUSTRIES compression fittings worldwide?
3G Electric supplies BRENNAN INDUSTRIES D6500 series compression fittings worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us for pricing and lead time on this steel compression elbow.
How to install a flareless bite-type compression elbow?
Insert the tube fully into the fitting until it bottoms out, then tighten the nut by hand. Use a wrench to tighten the nut to the manufacturer's recommended torque, typically 1/4 to 1/2 turn past hand-tight. Do not overtighten, as this can damage the bite ring or tube.
BRENNAN INDUSTRIES Produk
3G Electric memasok BRENNAN INDUSTRIES flareless bite-type steel compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
