BRENNAN INDUSTRIES Compression Elbow: 20 mm OD x 20 mm OD Size, M30X2.0 x M30X2.0 Thread Size
The BRENNAN INDUSTRIES Compression Elbow is a flareless bite-type steel compression fitting with a 20 mm OD x 20 mm OD size and M30X2.0 x M30X2.0 thread size. Part of the D6500 series (MPN D6500-S20-S20), this…
SKU 3G-OTH-470164
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BRENNAN INDUSTRIES Compression Elbow is a flareless bite-type steel compression fitting with a 20 mm OD x 20 mm OD size and M30X2.0 x M30X2.0 thread size. Part of the D6500 series (MPN D6500-S20-S20), this fitting is constructed from steel for industrial fluid-handling applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a BRENNAN INDUSTRIES D6500 compression elbow used for?
This flareless bite-type steel compression elbow connects two 20 mm OD tubes in industrial fluid-handling systems. It is used in hydraulic, pneumatic, and lubrication lines where a leak-tight, vibration-resistant joint is required. BRENNAN INDUSTRIES fittings are trusted in demanding applications.
What are the specifications of the BRENNAN INDUSTRIES D6500-S20-S20?
The D6500-S20-S20 is a steel compression elbow with 20 mm OD x 20 mm OD tube size and M30X2.0 x M30X2.0 thread size. It is part of the BRENNAN INDUSTRIES D6500 series, designed as a flareless bite-type fitting for secure metal-to-metal sealing in high-pressure fluid systems.
Where to buy a BRENNAN INDUSTRIES D6500 compression elbow worldwide?
3G Electric supplies the BRENNAN INDUSTRIES D6500-S20-S20 compression elbow to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this steel flareless fitting for industrial fluid systems.
How to install a flareless bite-type compression fitting?
Installation requires cutting the tube square, deburring, and sliding the nut and ferrule onto the tube. Insert the tube into the fitting body until it bottoms out, then tighten the nut to the manufacturer's recommended torque. Over-tightening can damage the bite ring. Always follow BRENNAN INDUSTRIES guidelines.
BRENNAN INDUSTRIES Produk
3G Electric memasok BRENNAN INDUSTRIES flareless bite-type steel compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
