BRENNAN INDUSTRIES Compression Tube Straight: 12 mm OD x 12 mm OD Size, Metric x Metric
The BRENNAN INDUSTRIES Compression Tube Straight (MPN D6565-S12-S12) is a flareless bite-type steel compression fitting in the D6565-EQUAL series, designed for 12 mm OD x 12 mm OD metric tube connections. As a steel…
SKU 3G-OTH-470171
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BRENNAN INDUSTRIES Compression Tube Straight (MPN D6565-S12-S12) is a flareless bite-type steel compression fitting in the D6565-EQUAL series, designed for 12 mm OD x 12 mm OD metric tube connections. As a steel, metric x metric fitting, it provides a reliable bite-type seal for industrial fluid systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a BRENNAN INDUSTRIES compression tube straight fitting used for?
This flareless bite-type steel compression fitting connects two 12 mm OD metric tubes in industrial fluid systems. It creates a reliable bite-type seal for hydraulic, pneumatic, and lubrication lines, commonly used in manufacturing, oil and gas, and heavy equipment applications.
What are the specifications of the BRENNAN INDUSTRIES D6565-S12-S12?
The BRENNAN INDUSTRIES D6565-S12-S12 is a steel, metric x metric compression tube straight from the D6565-EQUAL series. It connects 12 mm OD tube to 12 mm OD tube, using a flareless bite-type design for secure sealing in fluid systems.
Where to buy BRENNAN INDUSTRIES compression fittings worldwide?
3G Electric supplies and delivers BRENNAN INDUSTRIES compression fittings worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure your order arrives at your facility, wherever you are located.
How to install a flareless bite-type compression fitting?
Insert the tube fully into the fitting until it bottoms out, then tighten the nut by hand. Use a wrench to tighten an additional 1 to 1.25 turns for steel fittings. Always follow the manufacturer's instructions and verify the bite ring has formed properly before pressurizing the system.
BRENNAN INDUSTRIES Produk
3G Electric memasok BRENNAN INDUSTRIES flareless bite-type steel compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
