BRENNAN INDUSTRIES Compression Tee Fitting: M22x1.5 x M22x1.5 x M22x1.5 Thread Size, Steel
The BRENNAN INDUSTRIES Compression Tee Fitting (Series D6602) is a flareless bite-type steel compression fitting with M22x1.5 x M22x1.5 x M22x1.5 thread sizes and a swivel design. 3G Electric interprets demand for…
SKU 3G-OTH-470338
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BRENNAN INDUSTRIES Compression Tee Fitting (Series D6602) is a flareless bite-type steel compression fitting with M22x1.5 x M22x1.5 x M22x1.5 thread sizes and a swivel design. 3G Electric interprets demand for this OEM-sourced component across 14 industrial departments, with specialist depth in combustion, pumps and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a BRENNAN INDUSTRIES compression tee fitting used for?
This flareless bite-type steel compression tee fitting connects three hydraulic or pneumatic lines at a branch point. It is used in industrial fluid power systems, lubrication circuits, and instrumentation lines where a leak-tight, vibration-resistant joint is required. 3G Electric supplies this OEM-sourced component across 14 industrial departments.
What are the specifications of the BRENNAN INDUSTRIES D6602 compression tee fitting?
The BRENNAN INDUSTRIES D6602 compression tee fitting is a steel, swivel-type fitting with M22x1.5 x M22x1.5 x M22x1.5 thread sizes. It is part of the D6602 series and is a flareless bite-type design for reliable metal-to-metal sealing. 3G Electric sources this genuine OEM component for global delivery.
Where to buy BRENNAN INDUSTRIES compression tee fittings worldwide?
3G Electric supplies BRENNAN INDUSTRIES compression tee fittings worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us to order the D6602-L15-L15-L15 or other BRENNAN INDUSTRIES fittings for your hydraulic or pneumatic system.
How to install a flareless bite-type compression tee fitting?
Installation requires cutting the tube square, deburring, and sliding the nut and ferrule onto the tube. Insert the tube into the fitting body until it bottoms out, then tighten the nut to the manufacturer's recommended torque. Over-tightening can damage the ferrule bite. 3G Electric can provide generic guidance for this BRENNAN INDUSTRIES fitting.
BRENNAN INDUSTRIES Produk
3G Electric memasok BRENNAN INDUSTRIES flareless bite-type steel compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
