BRENNAN INDUSTRIES Compression Tube Straight: 22 mm OD x 12 mm OD size
The BRENNAN INDUSTRIES Compression Tube Straight is a Metric Flareless Bite Type Stainless Steel Compression Fitting with a 22 mm OD x 12 mm OD size. It features an M30X2.0 x 3/4-14 Thread Size and is part of the…
SKU 3G-OTH-470786
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BRENNAN INDUSTRIES Compression Tube Straight is a Metric Flareless Bite Type Stainless Steel Compression Fitting with a 22 mm OD x 12 mm OD size. It features an M30X2.0 x 3/4-14 Thread Size and is part of the D7405 Series (MPN D7405-L22-12-SS).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a BRENNAN INDUSTRIES D7405-L22-12-SS compression fitting used for?
This metric flareless bite type stainless steel compression tube straight is used to connect 22 mm OD tubing to a 12 mm OD port in hydraulic and pneumatic systems. It provides a leak-tight seal in high-pressure fluid power applications across industries like oil and gas, chemical processing, and industrial machinery.
What are the specifications of the BRENNAN INDUSTRIES D7405-L22-12-SS?
The BRENNAN INDUSTRIES D7405-L22-12-SS is a metric flareless bite type stainless steel compression fitting. It has a 22 mm OD x 12 mm OD tube size, M30X2.0 x 3/4-14 thread size, and is part of the D7405 Series. The material is stainless steel for corrosion resistance in demanding environments.
Where to buy BRENNAN INDUSTRIES compression fittings worldwide?
3G Electric supplies BRENNAN INDUSTRIES compression fittings like the D7405-L22-12-SS to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote on this metric flareless bite type stainless steel fitting for your industrial application.
How to install a BRENNAN INDUSTRIES metric flareless bite type fitting?
To install a BRENNAN INDUSTRIES D7405-L22-12-SS, cut tubing square, deburr, and insert fully into the fitting. Tighten the nut by hand, then use a wrench to turn the specified number of flats per manufacturer instructions. Over-tightening can damage the bite ring. Always pressure-test the joint after assembly.
BRENNAN INDUSTRIES Produk
3G Electric memasok BRENNAN INDUSTRIES metric flareless bite type stainless steel compressin fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
