BRENNAN INDUSTRIES Compression Tube Straight: 6 mm OD x 2 mm OD Size
The BRENNAN INDUSTRIES Compression Tube Straight (MPN D7505-L06-02-ED) is a flareless bite-type steel compression fitting from the D7505-ED series, designed for 6 mm OD x 2 mm OD tubing with M12X1.5 x 1/8-28 thread…
SKU 3G-OTH-470339
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BRENNAN INDUSTRIES Compression Tube Straight (MPN D7505-L06-02-ED) is a flareless bite-type steel compression fitting from the D7505-ED series, designed for 6 mm OD x 2 mm OD tubing with M12X1.5 x 1/8-28 thread size. 3G Electric interprets demand and delivers this genuine industrial fitting across 14 departments, with specialist depth in combustion, pumps and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a BRENNAN INDUSTRIES compression tube straight fitting used for?
This flareless bite-type steel compression fitting connects 6 mm OD x 2 mm OD tubing in hydraulic and pneumatic systems. It is used in industrial machinery, fluid power, and instrumentation applications where a leak-tight, vibration-resistant joint is required.
What are the specifications of the BRENNAN INDUSTRIES D7505-L06-02-ED?
The BRENNAN INDUSTRIES D7505-L06-02-ED is a flareless bite-type steel compression fitting from the D7505-ED series. It has a 6 mm OD x 2 mm OD tube size and M12X1.5 x 1/8-28 thread size. The manufacturer part number is D7505-L06-02-ED.
Where to buy BRENNAN INDUSTRIES compression fittings worldwide?
3G Electric supplies BRENNAN INDUSTRIES compression fittings worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us to order the D7505-L06-02-ED or any other genuine industrial fitting from our 14-department portfolio.
How to install a flareless bite-type compression fitting?
Cut tubing square, deburr, and slide the nut and ferrule onto the tube. Insert the tube fully into the fitting body, then tighten the nut by hand. Use a wrench to tighten further until the ferrule bites into the tube. Do not overtighten to avoid damaging the seal.
BRENNAN INDUSTRIES Produk
3G Electric memasok BRENNAN INDUSTRIES flareless bite-type steel compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
