BRENNAN INDUSTRIES Compression Tube Straight: 12 mm OD x 8 mm OD Size
The BRENNAN INDUSTRIES Compression Tube Straight (MPN D7505-S12-08-ED) is a flareless bite type steel compression fitting with seal, designed for 12 mm OD x 8 mm OD tube sizes. It features an M20X1.5 x 1/2-14 thread…
SKU 3G-OTH-480458
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BRENNAN INDUSTRIES Compression Tube Straight (MPN D7505-S12-08-ED) is a flareless bite type steel compression fitting with seal, designed for 12 mm OD x 8 mm OD tube sizes. It features an M20X1.5 x 1/2-14 thread size and belongs to the D7505-ED series.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the BRENNAN INDUSTRIES D7505-S12-08-ED compression fitting used for?
This flareless bite type steel compression fitting with seal connects 12 mm OD to 8 mm OD tubing in hydraulic and pneumatic systems. It is used in industrial fluid power applications where a leak-tight, vibration-resistant joint is required, such as in machine tools, presses, and process lines.
What are the specifications of the BRENNAN INDUSTRIES D7505-S12-08-ED?
The BRENNAN INDUSTRIES D7505-S12-08-ED is a flareless bite type steel compression fitting with seal. It has a 12 mm OD x 8 mm OD tube size, M20X1.5 x 1/2-14 thread size, and belongs to the D7505-ED series. The manufacturer part number is D7505-S12-08-ED.
Where to buy BRENNAN INDUSTRIES compression fittings worldwide?
3G Electric supplies BRENNAN INDUSTRIES compression fittings like the D7505-S12-08-ED to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote on this flareless bite type steel fitting with seal.
How to install a flareless bite type compression fitting?
Insert the tube fully into the fitting until it bottoms out. Tighten the nut by hand, then use a wrench to turn it the specified number of flats (typically 1 to 1.25 turns) as per the manufacturer's instructions. Over-tightening can damage the bite ring and cause leaks.
BRENNAN INDUSTRIES Produk
3G Electric memasok BRENNAN INDUSTRIES flareless bite type steel compression fittings with seal. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
