BRENNAN INDUSTRIES Compression Tube Straight: 16 mm OD x 8 mm OD size
The BRENNAN INDUSTRIES Compression Tube Straight (SKU 429CG4) is a metric flareless bite type stainless steel compression fitting with seal, designed for 16 mm OD x 8 mm OD tube sizes. It features an M24X1.5 x 1/2-14…
SKU 3G-OTH-596459
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BRENNAN INDUSTRIES Compression Tube Straight (SKU 429CG4) is a metric flareless bite type stainless steel compression fitting with seal, designed for 16 mm OD x 8 mm OD tube sizes. It features an M24X1.5 x 1/2-14 thread size (MPN D7505-S16-08-ED-SS) and is identified by attribute D7505-ED.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a BRENNAN INDUSTRIES compression tube straight fitting used for?
This metric flareless bite type stainless steel compression fitting with seal connects 16 mm OD to 8 mm OD tubing in hydraulic and pneumatic systems. It provides a leak-proof joint in industrial fluid power applications, commonly used in instrumentation, lubrication, and process control lines.
What are the specifications of the BRENNAN D7505-S16-08-ED-SS fitting?
The BRENNAN INDUSTRIES D7505-S16-08-ED-SS is a metric flareless bite type stainless steel compression fitting with seal. It has an M24X1.5 x 1/2-14 thread size and accommodates 16 mm OD x 8 mm OD tube sizes. The MPN is D7505-S16-08-ED-SS and the SKU is 429CG4.
Where to buy BRENNAN INDUSTRIES compression fittings worldwide?
3G Electric supplies BRENNAN INDUSTRIES compression fittings like the D7505-S16-08-ED-SS to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote on this metric flareless bite type stainless steel fitting with seal.
How to install a BRENNAN flareless bite type compression fitting?
Insert the tube fully into the fitting until it bottoms out. Tighten the nut by hand, then use a wrench to turn it the specified number of flats per the manufacturer's instructions. Over-tightening can damage the bite ring. Always verify the seal after pressurization.
BRENNAN INDUSTRIES Produk
3G Electric memasok BRENNAN INDUSTRIES metric flareless bite type stainless steel compression fittings with seal. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
