BRENNAN INDUSTRIES Compression Tube Straight: 20 mm OD x 8 mm OD size
The BRENNAN INDUSTRIES Compression Tube Straight (SKU 429CH4) is a metric flareless bite type stainless steel compression fitting with seal, designed for 20 mm OD x 8 mm OD tube sizes. It features an M30X2.0 x 1/2-14…
SKU 3G-OTH-596460
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BRENNAN INDUSTRIES Compression Tube Straight (SKU 429CH4) is a metric flareless bite type stainless steel compression fitting with seal, designed for 20 mm OD x 8 mm OD tube sizes. It features an M30X2.0 x 1/2-14 thread size (MPN D7505-S20-08-ED-SS) and is identified by attribute D7505-ED.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a BRENNAN INDUSTRIES compression tube straight fitting used for?
This metric flareless bite type stainless steel compression fitting with seal connects 20 mm OD to 8 mm OD tubing in hydraulic and pneumatic systems. It provides a leak-tight, vibration-resistant joint for industrial fluid power applications where stainless steel corrosion resistance is required.
What are the specifications of the BRENNAN INDUSTRIES D7505-S20-08-ED-SS?
The BRENNAN INDUSTRIES D7505-S20-08-ED-SS is a metric flareless bite type stainless steel compression fitting with seal. It has an M30X2.0 x 1/2-14 thread size and accommodates 20 mm OD x 8 mm OD tube sizes. The MPN is D7505-S20-08-ED-SS and the attribute is D7505-ED.
Where to buy BRENNAN INDUSTRIES compression fittings worldwide?
3G Electric supplies BRENNAN INDUSTRIES compression fittings worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to source the D7505-S20-08-ED-SS or other metric flareless bite type stainless steel fittings for your application.
How to install a BRENNAN INDUSTRIES flareless bite type compression fitting?
Insert the tube fully into the fitting until it bottoms out, then tighten the nut finger-tight. Mark the nut position, then tighten the specified number of turns (typically 1 to 1.25 turns) to set the bite ring. Always follow the manufacturer's instructions for torque and re-tightening to ensure a leak-free seal.
BRENNAN INDUSTRIES Produk
3G Electric memasok BRENNAN INDUSTRIES metric flareless bite type stainless steel compression fittings with seal. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
