BRENNAN INDUSTRIES Compression Fitting Cap: 10 mm OD size, M16x1.5 Thread Size, Compression
The BRENNAN INDUSTRIES Compression Fitting Cap is a flareless bite-type stainless steel compression fitting with a 10 mm OD size and M16x1.5 thread size, part of the Volz series (MPN D0304-C-L10-SS). It is designed…
SKU 3G-OTH-479167
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BRENNAN INDUSTRIES Compression Fitting Cap is a flareless bite-type stainless steel compression fitting with a 10 mm OD size and M16x1.5 thread size, part of the Volz series (MPN D0304-C-L10-SS). It is designed for use in compression systems requiring a secure cap closure.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the BRENNAN INDUSTRIES compression fitting cap used for?
The BRENNAN INDUSTRIES compression fitting cap (MPN D0304-C-L10-SS) is used to securely close the end of a flareless bite-type stainless steel compression system. It is commonly applied in hydraulic and pneumatic lines where a leak-proof seal is required, such as in industrial machinery and fluid power systems.
What are the specifications of the BRENNAN INDUSTRIES D0304-C-L10-SS cap?
This cap has a 10 mm OD size and M16x1.5 thread size. It is part of the Volz series, made from stainless steel, and is a flareless bite-type compression fitting. The manufacturer part number is D0304-C-L10-SS, and it is designed for use in compression systems requiring a secure cap closure.
Where to buy BRENNAN INDUSTRIES compression fittings worldwide?
3G Electric supplies BRENNAN INDUSTRIES compression fittings, including the Volz series cap, to customers worldwide. We handle full logistics, customs clearance, and delivery to your location. Contact us for pricing and lead time on this item.
How to install a flareless bite-type compression fitting cap?
To install a flareless bite-type compression fitting cap, ensure the tube end is clean and cut square. Insert the tube into the fitting body until it bottoms out, then tighten the cap nut to the manufacturer's recommended torque. Over-tightening can damage the ferrule and cause leaks.
BRENNAN INDUSTRIES Produk
3G Electric memasok BRENNAN INDUSTRIES flareless bite-type stainless steel compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
