BRENNAN INDUSTRIES Compression Fitting Cap: 35 mm OD size, M45x2.0 Thread Size, Compression
The BRENNAN INDUSTRIES Compression Fitting Cap (SKU 812JC6) is a flareless bite-type stainless steel compression fitting with a 35 mm OD size and M45x2.0 thread size, part of the Volz series (MPN D0304-C-L35-SS)…
SKU 3G-OTH-479062
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BRENNAN INDUSTRIES Compression Fitting Cap (SKU 812JC6) is a flareless bite-type stainless steel compression fitting with a 35 mm OD size and M45x2.0 thread size, part of the Volz series (MPN D0304-C-L35-SS). This cap is designed for compression connections in industrial systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the BRENNAN INDUSTRIES compression fitting cap used for?
This flareless bite-type stainless steel compression fitting cap seals the end of a compression connection in industrial fluid systems. It is commonly used in hydraulic, pneumatic, and instrumentation applications where a leak-tight, high-pressure seal is required.
What are the specifications of the BRENNAN INDUSTRIES compression fitting cap?
The BRENNAN INDUSTRIES compression fitting cap (MPN D0304-C-L35-SS) has a 35 mm OD size and M45x2.0 thread size. It is part of the Volz series and is made of stainless steel. The cap is designed for flareless bite-type compression connections.
Where to buy the BRENNAN INDUSTRIES compression fitting cap worldwide?
3G Electric supplies the BRENNAN INDUSTRIES compression fitting cap (SKU 812JC6) to customers worldwide. We handle full logistics, customs clearance, and delivery to your location. Contact us for pricing and lead time on this Volz series stainless steel cap.
How to install a BRENNAN INDUSTRIES compression fitting cap?
Installation follows standard flareless bite-type fitting practice: ensure the tube is clean and deburred, insert it fully into the fitting body, then tighten the cap nut to the manufacturer's recommended torque. Over-tightening can damage the bite ring or seal.
BRENNAN INDUSTRIES Produk
3G Electric memasok BRENNAN INDUSTRIES flareless bite-type stainless steel compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
