BRENNAN INDUSTRIES Compression Fitting Elbow: 10 mm OD x 10 mm OD size
The BRENNAN INDUSTRIES Compression Fitting Elbow is a flareless bite-type stainless steel compression fitting in a 10 mm OD x 10 mm OD size, Compression x Compression configuration (MPN D2500-L10-L10-SS). Part of the…
SKU 3G-OTH-479031
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BRENNAN INDUSTRIES Compression Fitting Elbow is a flareless bite-type stainless steel compression fitting in a 10 mm OD x 10 mm OD size, Compression x Compression configuration (MPN D2500-L10-L10-SS). Part of the Volz series, this fitting is designed for connecting tubing in industrial fluid systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a BRENNAN INDUSTRIES compression fitting elbow used for?
This flareless bite-type stainless steel compression elbow connects 10 mm OD tubing in industrial fluid systems. It is used in hydraulic, pneumatic, and instrumentation lines where a leak-tight, vibration-resistant joint is required. The Volz series design ensures reliable sealing without flaring the tube end.
What are the specifications of the BRENNAN INDUSTRIES D2500-L10-L10-SS?
This compression fitting elbow has a 10 mm OD x 10 mm OD size with Compression x Compression ends. It is part of the Volz series, made of stainless steel, and uses a flareless bite-type design. The manufacturer part number is D2500-L10-L10-SS, and it is produced by BRENNAN INDUSTRIES.
Where to buy BRENNAN INDUSTRIES compression fittings worldwide?
3G Electric supplies BRENNAN INDUSTRIES compression fittings worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to source the D2500-L10-L10-SS or other Volz series fittings for your fluid system needs.
How to install a flareless bite-type compression fitting?
Insert the tube fully into the fitting until it stops. Tighten the nut by hand, then use a wrench to turn the nut the recommended number of flats (typically 1 to 1.25 turns) to create the bite ring seal. Do not overtighten. Always follow the manufacturer's instructions for the specific BRENNAN INDUSTRIES fitting.
BRENNAN INDUSTRIES Produk
3G Electric memasok BRENNAN INDUSTRIES flareless bite-type stainless steel compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
