BRENNAN INDUSTRIES Compression Fitting Elbow: 10 mm OD x 1/2 in Pipe size, Compression x MNPT
The BRENNAN INDUSTRIES Compression Fitting Elbow is a flareless bite-type stainless steel compression fitting with a 10 mm OD tube size and 1/2 in pipe size, configured as Compression x MNPT. Part of the Volz series…
SKU 3G-OTH-479048
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BRENNAN INDUSTRIES Compression Fitting Elbow is a flareless bite-type stainless steel compression fitting with a 10 mm OD tube size and 1/2 in pipe size, configured as Compression x MNPT. Part of the Volz series (MPN D2501-S10-08-SS), this fitting is designed for secure, leak-resistant connections in industrial fluid systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a BRENNAN INDUSTRIES Volz compression fitting elbow used for?
This flareless bite-type stainless steel compression fitting elbow creates leak-resistant connections in industrial fluid systems. It joins 10 mm OD tubing to a 1/2 in male NPT port, commonly used in hydraulic, pneumatic, and instrumentation lines where vibration resistance and reliable sealing are required.
What are the specifications of the BRENNAN INDUSTRIES D2501-S10-08-SS?
This BRENNAN INDUSTRIES Volz series fitting is a compression x MNPT elbow with a 10 mm OD tube size and 1/2 in pipe size. It is made of stainless steel and uses a flareless bite-type design for secure connections. The manufacturer part number is D2501-S10-08-SS.
Where to buy BRENNAN INDUSTRIES compression fittings worldwide?
3G Electric supplies BRENNAN INDUSTRIES compression fittings worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver the Volz series D2501-S10-08-SS and other configurations to your facility. Contact us for a quote and delivery options.
How to install a flareless bite-type compression fitting?
Insert the tube fully into the fitting until it bottoms out, then tighten the nut by hand. Use a wrench to turn the nut the manufacturer-recommended number of flats (typically 1 to 1.25 turns) to set the bite ring. Do not overtighten. Always follow BRENNAN INDUSTRIES installation instructions for the Volz series.
BRENNAN INDUSTRIES Produk
3G Electric memasok BRENNAN INDUSTRIES flareless bite-type stainless steel compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
