BRENNAN INDUSTRIES Compression Tee Fitting: M22x1.5 x M22x1.5 x M22x1.5 Thread Size
The BRENNAN INDUSTRIES Compression Tee Fitting is a Flareless Bite-Type Stainless Steel Compression Fitting from the Volz series (MPN D2603-S14-S14-S14-SS), featuring M22x1.5 x M22x1.5 x M22x1.5 thread sizes. This…
SKU 3G-OTH-479163
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BRENNAN INDUSTRIES Compression Tee Fitting is a Flareless Bite-Type Stainless Steel Compression Fitting from the Volz series (MPN D2603-S14-S14-S14-SS), featuring M22x1.5 x M22x1.5 x M22x1.5 thread sizes. This component is designed for industrial fluid systems requiring secure, leak-resistant connections.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the BRENNAN INDUSTRIES Compression Tee Fitting used for?
This flareless bite-type stainless steel compression tee fitting from the Volz series is used to create leak-resistant branch connections in industrial fluid systems. It is suitable for hydraulic, pneumatic, and instrumentation lines where secure, vibration-resistant joints are required.
What are the specifications of the BRENNAN INDUSTRIES Compression Tee Fitting?
This fitting is a Volz series flareless bite-type stainless steel compression tee with M22x1.5 x M22x1.5 x M22x1.5 thread sizes. The manufacturer part number is D2603-S14-S14-S14-SS. It is designed for high-pressure fluid systems requiring reliable, leak-tight connections.
Where to buy the BRENNAN INDUSTRIES Compression Tee Fitting worldwide?
3G Electric supplies the BRENNAN INDUSTRIES Volz series compression tee fitting worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time on this M22x1.5 stainless steel fitting.
How to install a flareless bite-type compression fitting?
Installation requires cutting the tube square, deburring, and sliding the nut and ferrule onto the tube. Insert the tube into the fitting body until it bottoms out, then tighten the nut to the manufacturer's recommended torque. Over-tightening can damage the bite ring.
BRENNAN INDUSTRIES Produk
3G Electric memasok BRENNAN INDUSTRIES flareless bite-type stainless steel compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
