BRENNAN INDUSTRIES Compression Fitting Elbow: 28 mm OD x 28 mm OD size, Compression x Metric
The BRENNAN INDUSTRIES Compression Fitting Elbow is a flareless bite-type stainless steel compression fitting in a 28 mm OD x 28 mm OD size, part of the Volz series (MPN D6500-L28-L28-SS). It connects compression x…
SKU 3G-OTH-478911
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BRENNAN INDUSTRIES Compression Fitting Elbow is a flareless bite-type stainless steel compression fitting in a 28 mm OD x 28 mm OD size, part of the Volz series (MPN D6500-L28-L28-SS). It connects compression x metric tubing with a 90-degree elbow configuration.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the BRENNAN INDUSTRIES Volz compression fitting elbow used for?
The BRENNAN INDUSTRIES Volz compression fitting elbow (D6500-L28-L28-SS) is a flareless bite-type stainless steel fitting used to connect 28 mm OD metric tubing at a 90-degree angle in hydraulic and pneumatic systems. It provides a leak-tight, vibration-resistant joint in industrial fluid power applications.
What are the specifications of the BRENNAN INDUSTRIES D6500-L28-L28-SS?
The BRENNAN INDUSTRIES D6500-L28-L28-SS is a Volz series compression fitting elbow with 28 mm OD x 28 mm OD size, compression x metric connection, and a 90-degree elbow configuration. It is made of stainless steel and is a flareless bite-type design for secure tube gripping.
Where to buy BRENNAN INDUSTRIES compression fittings worldwide?
3G Electric supplies and delivers BRENNAN INDUSTRIES compression fittings, including the Volz series D6500-L28-L28-SS, to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this stainless steel elbow.
How to install a BRENNAN INDUSTRIES flareless bite-type compression fitting?
To install a BRENNAN INDUSTRIES flareless bite-type fitting, cut the tube square, deburr, and insert fully into the fitting. Tighten the nut by hand, then use a wrench to turn the specified number of flats per the manufacturer's instructions. Over-tightening can damage the bite ring. Always verify with the installation guide.
BRENNAN INDUSTRIES Produk
3G Electric memasok BRENNAN INDUSTRIES flareless bite-type stainless steel compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
