BRENNAN INDUSTRIES Compression Fitting Union: 1/8 in OD Size, Tube x Tube
The BRENNAN INDUSTRIES Compression Fitting Union is a clean and bagged double-ferrule brass compression fitting, type Tube x Tube, with a 1/8 in OD size. It is part of Series N2403 (MPN N2403-02-01-B) and is…
SKU 3G-OTH-465948
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BRENNAN INDUSTRIES Compression Fitting Union is a clean and bagged double-ferrule brass compression fitting, type Tube x Tube, with a 1/8 in OD size. It is part of Series N2403 (MPN N2403-02-01-B) and is compatible with Hy-Lok fitting brands.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a BRENNAN INDUSTRIES compression fitting union used for?
A BRENNAN INDUSTRIES compression fitting union connects two tubes of the same size in a straight line, creating a leak-tight seal. This 1/8 in OD brass double-ferrule union is used in instrumentation, hydraulic, and pneumatic systems where reliable, vibration-resistant connections are required.
What are the specifications of the BRENNAN INDUSTRIES N2403-02-01-B compression fitting?
The BRENNAN INDUSTRIES N2403-02-01-B is a clean and bagged double-ferrule brass compression fitting union. It has a 1/8 in OD tube size, Tube x Tube configuration, and is part of Series N2403. It is compatible with Hy-Lok fitting brands.
Where to buy BRENNAN INDUSTRIES compression fittings worldwide?
3G Electric supplies BRENNAN INDUSTRIES compression fittings worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to source the N2403-02-01-B or other BRENNAN INDUSTRIES fittings for your application.
How to install a double-ferrule brass compression fitting?
To install a double-ferrule compression fitting, slide the nut and ferrules onto the tube, insert the tube fully into the fitting body, then tighten the nut by hand. Use a wrench to tighten an additional 1 to 1.25 turns for a leak-free seal. Always follow the manufacturer's instructions for torque specifications.
BRENNAN INDUSTRIES Produk
3G Electric memasok BRENNAN INDUSTRIES clean & bagged double-ferrule brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
