BRENNAN INDUSTRIES Compression Fitting Elbow: 3/8 in OD x 3/8 in OD Size, Tube x Tube
The BRENNAN INDUSTRIES Compression Fitting Elbow is a Clean & Bagged Double-Ferrule Brass Compression Fitting, type Tube x Tube, Brass, with a 3/8 in OD x 3/8 in OD size. Part of the N2500 series (MPN N2500-06-06-B)…
SKU 3G-OTH-465975
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BRENNAN INDUSTRIES Compression Fitting Elbow is a Clean & Bagged Double-Ferrule Brass Compression Fitting, type Tube x Tube, Brass, with a 3/8 in OD x 3/8 in OD size. Part of the N2500 series (MPN N2500-06-06-B), it is compatible with Gyrolok fitting brands.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a BRENNAN INDUSTRIES compression fitting elbow used for?
This double-ferrule brass compression elbow connects two 3/8 in OD tubes in a 90-degree turn for leak-tight sealing in instrumentation, hydraulic, and pneumatic systems. It is compatible with Gyrolok fittings and is Clean & Bagged for critical applications.
What are the specifications of the BRENNAN N2500-06-06-B compression fitting?
The BRENNAN INDUSTRIES N2500-06-06-B is a Clean & Bagged double-ferrule brass compression fitting elbow. It has a Tube x Tube configuration with 3/8 in OD x 3/8 in OD size, is part of the N2500 series, and is compatible with Gyrolok fitting brands.
Where to buy BRENNAN INDUSTRIES compression fittings worldwide?
3G Electric supplies BRENNAN INDUSTRIES compression fittings like the N2500-06-06-B to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time on this brass double-ferrule elbow.
How to install a double-ferrule compression fitting?
Insert the tube fully into the fitting until it bottoms against the shoulder. Hand-tighten the nut, then use a wrench to tighten 1-1/4 turns past hand-tight for 3/8 in OD tubing. Do not overtighten. Always follow the manufacturer's instructions for leak-free performance.
BRENNAN INDUSTRIES Produk
3G Electric memasok BRENNAN INDUSTRIES clean & bagged double-ferrule brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
