BRENNAN INDUSTRIES Compression Fitting Elbow: 1/2 in OD x 1/2 in OD Size, Tube x Tube
The BRENNAN INDUSTRIES Compression Fitting Elbow is a clean and bagged double-ferrule brass compression fitting, tube x tube type, in a 1/2 in OD x 1/2 in OD size. Part of the N2500 series (MPN N2500-08-08-B), it is…
SKU 3G-OTH-465890
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BRENNAN INDUSTRIES Compression Fitting Elbow is a clean and bagged double-ferrule brass compression fitting, tube x tube type, in a 1/2 in OD x 1/2 in OD size. Part of the N2500 series (MPN N2500-08-08-B), it is compatible with Gyrolok fitting brands.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the BRENNAN INDUSTRIES N2500-08-08-B compression fitting elbow used for?
This double-ferrule brass compression fitting elbow connects two 1/2 in OD tubes in a 90-degree turn, creating a leak-tight seal in instrumentation, hydraulic, and pneumatic systems. It is compatible with Gyrolok brands and is clean and bagged for critical applications.
What are the specifications of the BRENNAN INDUSTRIES N2500-08-08-B?
The N2500-08-08-B is a tube x tube brass compression fitting elbow with 1/2 in OD on both ends. It is part of the N2500 series, double-ferrule design, clean and bagged. It is compatible with Gyrolok fitting brands and manufactured by BRENNAN INDUSTRIES.
Where to buy the BRENNAN INDUSTRIES N2500-08-08-B worldwide?
3G Electric supplies the BRENNAN INDUSTRIES N2500-08-08-B compression fitting elbow to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this clean and bagged double-ferrule brass fitting.
How to install a BRENNAN INDUSTRIES double-ferrule compression fitting?
Insert the tube fully into the fitting until it bottoms out, then hand-tighten the nut. Use a wrench to tighten 1-1/4 turns past hand-tight for a proper seal. Do not overtighten. For the N2500 series brass elbow, ensure tube ends are deburred and clean before assembly.
BRENNAN INDUSTRIES Produk
3G Electric memasok BRENNAN INDUSTRIES clean & bagged double-ferrule brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
