BRENNAN INDUSTRIES Compression Fitting Elbow: 1/4 in OD x 3/8 in Pipe Size, Tube x FNPT
The BRENNAN INDUSTRIES Compression Fitting Elbow is a clean & bagged double-ferrule brass compression fitting, type Tube x FNPT, in the N2502 series. It connects 1/4 in OD tubing to 3/8 in pipe size and is compatible…
SKU 3G-OTH-465989
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BRENNAN INDUSTRIES Compression Fitting Elbow is a clean & bagged double-ferrule brass compression fitting, type Tube x FNPT, in the N2502 series. It connects 1/4 in OD tubing to 3/8 in pipe size and is compatible with Hy-Lok fitting brands.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the BRENNAN INDUSTRIES N2502-04-06-B compression fitting elbow used for?
This clean & bagged double-ferrule brass compression fitting elbow connects 1/4 in OD tubing to 3/8 in FNPT pipe threads. It is used in industrial fluid and gas systems where a leak-tight, vibration-resistant joint is required, such as instrumentation, hydraulic, and pneumatic circuits.
What are the specifications of the BRENNAN INDUSTRIES N2502-04-06-B?
The BRENNAN INDUSTRIES N2502-04-06-B is a Tube x FNPT brass compression fitting elbow from the N2502 series. It has a 1/4 in OD tube size and 3/8 in pipe size. It is compatible with Hy-Lok fitting brands and is supplied clean and bagged.
Where to buy the BRENNAN INDUSTRIES N2502-04-06-B worldwide?
3G Electric supplies the BRENNAN INDUSTRIES N2502-04-06-B compression fitting elbow to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this brass double-ferrule fitting.
How to install a BRENNAN INDUSTRIES double-ferrule compression fitting?
To install a BRENNAN INDUSTRIES double-ferrule compression fitting, slide the nut and ferrules onto the tube, insert the tube fully into the fitting body, then tighten the nut by hand. Use a wrench to tighten an additional 1-1/4 turns for a proper seal. Do not overtighten.
BRENNAN INDUSTRIES Produk
3G Electric memasok BRENNAN INDUSTRIES clean & bagged double-ferrule brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
