BRENNAN INDUSTRIES Compression Cross Fitting: 3/8 in OD x 3/8 in OD x 3/8 in OD x
The BRENNAN INDUSTRIES Compression Cross Fitting (SKU 826CJ5) is a Clean & Bagged Double-Ferrule Brass Compression Fitting in a 3/8 in OD x 3/8 in OD x 3/8 in OD x 3/8 in OD size, Series N2650. It is compatible with…
SKU 3G-OTH-465921
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BRENNAN INDUSTRIES Compression Cross Fitting (SKU 826CJ5) is a Clean & Bagged Double-Ferrule Brass Compression Fitting in a 3/8 in OD x 3/8 in OD x 3/8 in OD x 3/8 in OD size, Series N2650. It is compatible with Swagelok fitting brands, ensuring interchangeability in existing systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the BRENNAN INDUSTRIES Compression Cross Fitting used for?
This Clean & Bagged Double-Ferrule Brass Compression Fitting creates a leak-tight seal in tubing systems for instrumentation, hydraulic, and pneumatic applications. Its cross configuration allows four branch connections from a single point, commonly used in manifold assemblies and distribution networks.
What are the specifications of the BRENNAN INDUSTRIES N2650-06-06-06-06-B?
This compression cross fitting has four 3/8 in OD tube connections, is made of brass, and is part of the N2650 Series. It is Clean & Bagged for critical service and is compatible with Swagelok fitting brands, ensuring interchangeability in existing systems.
Where to buy the BRENNAN INDUSTRIES Compression Cross Fitting worldwide?
3G Electric supplies and delivers the BRENNAN INDUSTRIES Compression Cross Fitting worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure your order arrives at your facility, wherever it is located.
How to install a double-ferrule compression cross fitting?
Insert the tube fully into the fitting, then hand-tighten the nut. Mark the nut position, then tighten an additional 1 1/4 turns for brass fittings. Always use the correct ferrule set for the tube material and wall thickness to ensure a leak-free seal.
BRENNAN INDUSTRIES Produk
3G Electric memasok BRENNAN INDUSTRIES clean & bagged double-ferrule brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
