BRENNAN INDUSTRIES Compression Fitting Straight: 1/8 in OD x 1/16 in Pipe Fitting
The BRENNAN INDUSTRIES Compression Fitting Straight (MPN NS2404-02-01-SS) is a Clean & Bagged Single-Ferrule Stainless Steel Fitting from the NS2404 series, with a 1/8 in OD and 1/16 in Pipe Fitting Size. 3G Electric…
SKU 3G-OTH-468841
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BRENNAN INDUSTRIES Compression Fitting Straight (MPN NS2404-02-01-SS) is a Clean & Bagged Single-Ferrule Stainless Steel Fitting from the NS2404 series, with a 1/8 in OD and 1/16 in Pipe Fitting Size. 3G Electric interprets this demand and delivers genuine industrial fittings across 14 departments, with specialist depth in combustion, pumps and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the BRENNAN INDUSTRIES NS2404-02-01-SS compression fitting used for?
This Clean & Bagged Single-Ferrule Stainless Steel Fitting connects 1/8 in OD tubing to a 1/16 in pipe thread in instrumentation, hydraulic, and pneumatic systems. BRENNAN INDUSTRIES fittings are trusted for leak-free performance in demanding industrial applications.
What are the specifications of the BRENNAN INDUSTRIES NS2404-02-01-SS?
The NS2404-02-01-SS is a BRENNAN INDUSTRIES compression fitting straight from the NS2404 series. It has a 1/8 in OD tube size and a 1/16 in pipe fitting size. The fitting is Clean & Bagged Single-Ferrule Stainless Steel, part number NS2404-02-01-SS.
Where to buy BRENNAN INDUSTRIES NS2404-02-01-SS worldwide?
3G Electric supplies the BRENNAN INDUSTRIES NS2404-02-01-SS compression fitting to customers worldwide. We handle full logistics, customs clearance, and delivery, sourcing genuine industrial fittings across 14 departments including combustion, pumps, and controls.
How to install a BRENNAN INDUSTRIES single-ferrule compression fitting?
Insert the tube fully into the fitting until it bottoms against the ferrule. Tighten the nut by hand, then use a wrench for the recommended turns per BRENNAN INDUSTRIES guidelines. Over-tightening can damage the ferrule seal. Always verify the tube is properly seated before pressurizing.
BRENNAN INDUSTRIES Produk
3G Electric memasok BRENNAN INDUSTRIES clean & bagged single-ferrule stainless steel fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
