Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
Lurus Tabung Kompresi BRENNAN INDUSTRIES: Diameter Luar 10 mm x Diameter Luar 6 mm x Ukuran Pipa 3/8 in, Baja - Flareless Bite-Type Steel Compression Fittings
BRENNAN INDUSTRIESFlareless Bite-Type Steel Compression Fittings

Lurus Tabung Kompresi BRENNAN INDUSTRIES: Diameter Luar 10 mm x Diameter Luar 6 mm x Ukuran Pipa 3/8 in, Baja

BRENNAN INDUSTRIES menghadirkan Compression Tube Straight seri D7404, yaitu flareless bite-type steel compression fittings yang dirancang untuk sambungan pipa kaku berdiameter 10 mm OD ke 6 mm OD. Dengan nomor part…

SKU 3G-OTH-470066

Juga terdaftar sebagai: D7404L1006 · D7404 L10 06

Merek
BRENNAN INDUSTRIES
Item
Lurus Tabung Kompresi BRENNAN INDUSTRIES: Diameter Luar 10 mm x Diameter Luar 6 mm x Ukuran Pipa 3/8 in, Baja
Kategori
Flareless Bite-Type Steel Compression Fittings
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

BRENNAN INDUSTRIES
Manufacturer Part Number
D7404-L10-06
Series
D7404
Type
Steel, Rigid

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

BRENNAN INDUSTRIES Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

BRENNAN INDUSTRIES menghadirkan Compression Tube Straight seri D7404, yaitu flareless bite-type steel compression fittings yang dirancang untuk sambungan pipa kaku berdiameter 10 mm OD ke 6 mm OD. Dengan nomor part D7404-L10-06, fitting ini merupakan solusi andal untuk sistem perpipaan bertekanan di berbagai aplikasi industri, termasuk pembakar industri dan ketel uap. Cocok untuk Anda yang mencari compression fitting 10mm x 6mm di Indonesia.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa fungsi dari BRENNAN INDUSTRIES Compression Tube Straight D7404?

Fitting ini berfungsi sebagai konektor lurus untuk menyambung dua pipa kaku berdiameter 10 mm OD ke 6 mm OD dalam sistem perpipaan bertekanan. Tipe flareless bite-type memastikan sambungan kedap tanpa perlu perluasan ujung pipa, cocok untuk aplikasi pembakar industri dan ketel uap.

Apa spesifikasi teknis BRENNAN INDUSTRIES D7404-L10-06?

Spesifikasi produk ini meliputi: tipe Steel Rigid, merek BRENNAN INDUSTRIES, seri D7404, nomor part D7404-L10-06, dengan ukuran 10 mm OD x 6 mm OD. Fitting ini termasuk dalam kategori flareless bite-type steel compression fittings untuk sambungan pipa kaku.

Di mana beli BRENNAN INDUSTRIES D7404-L10-06 di Indonesia?

Anda dapat membeli BRENNAN INDUSTRIES D7404-L10-06 melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga Anda dapat menerima fitting compression 10mm x 6mm ini dengan mudah.

Bagaimana cara memilih compression fitting yang tepat untuk pipa 10 mm OD?

Pastikan Anda memilih fitting dengan ukuran yang sesuai, seperti BRENNAN INDUSTRIES D7404-L10-06 yang dirancang untuk pipa 10 mm OD ke 6 mm OD. Perhatikan juga tipe sambungan (flareless bite-type) dan material (steel rigid) agar sesuai dengan tekanan dan suhu operasi sistem Anda.

BRENNAN INDUSTRIES Produk

3G Electric memasok BRENNAN INDUSTRIES flareless bite-type steel compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This short clamp-on slit coupling from RULAND MANUFACTURING features a 6 mm bore on one side and a 3/16 in round bore on the other, with an overall length of 21/32 in. It is designed to connect two shafts in motion control systems, compensating for minor misalignment while transmitting torque with zero backlash and high torsional stiffness. Typical applications include encoders, stepper motors, and precision positioning equipment
RULAND MANUFACTURING
This short clamp-on slit coupling from RULAND MANUFACTURING features a 6 mm bore on one side and a 3/16 in round bore on the other, with an overall length of 21/32 in. It is designed to connect two shafts in motion control systems, compensating for minor misalignment while transmitting torque with zero backlash and high torsional stiffness. Typical applications include encoders, stepper motors, and precision positioning equipment
This short clamp-on slit coupling connects two shafts with bore diameters of 5 mm and 3/16 in, featuring a round type and overall length of 21/32 in. It is used in motion-control applications such as encoders, stepper motors, and precision positioning equipment to transmit torque while compensating for minor misalignment
RULAND MANUFACTURING
This short clamp-on slit coupling connects two shafts with bore diameters of 5 mm and 3/16 in, featuring a round type and overall length of 21/32 in. It is used in motion-control applications such as encoders, stepper motors, and precision positioning equipment to transmit torque while compensating for minor misalignment
This short clamp-on slit coupling connects two shafts with bore diameters of 6 mm and 3/16 in, and an outside diameter of 5/8 in. It is used in motion-control systems to transmit torque while compensating for minor misalignment, commonly in encoders, stepper motors, and precision positioning equipment
RULAND MANUFACTURING
This short clamp-on slit coupling connects two shafts with bore diameters of 6 mm and 3/16 in, and an outside diameter of 5/8 in. It is used in motion-control systems to transmit torque while compensating for minor misalignment, commonly in encoders, stepper motors, and precision positioning equipment
This short clamp-on slit coupling features a 3/16 in bore on one side and a 4 mm bore on the other, with an overall length of 27/32 in. The round body design is suited for compact installations in motion control systems. It connects two shafts while compensating for minor misalignment, commonly used in encoders, stepper motors, and precision positioning equipment
RULAND MANUFACTURING
This short clamp-on slit coupling features a 3/16 in bore on one side and a 4 mm bore on the other, with an overall length of 27/32 in. The round body design is suited for compact installations in motion control systems. It connects two shafts while compensating for minor misalignment, commonly used in encoders, stepper motors, and precision positioning equipment
This long clamp-on slit coupling from RULAND MANUFACTURING features a 6 mm bore diameter 1 and a 3/16 in bore diameter 2, with a round outer profile and overall length of 25/32 in. Designed for motion control applications, it provides zero backlash and torsional rigidity while compensating for minor shaft misalignment. The clamp-on design secures shafts without marring
RULAND MANUFACTURING
This long clamp-on slit coupling from RULAND MANUFACTURING features a 6 mm bore diameter 1 and a 3/16 in bore diameter 2, with a round outer profile and overall length of 25/32 in. Designed for motion control applications, it provides zero backlash and torsional rigidity while compensating for minor shaft misalignment. The clamp-on design secures shafts without marring
This short clamp-on slit coupling connects two shafts with bore diameters of 5 mm and 3/16 in, and has an outside diameter of 5/8 in. It is used in motion control systems to transmit torque while compensating for minor misalignment. Typical applications include connecting shafts in encoders, stepper motors, and linear actuators
RULAND MANUFACTURING
This short clamp-on slit coupling connects two shafts with bore diameters of 5 mm and 3/16 in, and has an outside diameter of 5/8 in. It is used in motion control systems to transmit torque while compensating for minor misalignment. Typical applications include connecting shafts in encoders, stepper motors, and linear actuators

Lainnya dari BRENNAN INDUSTRIES

Lihat semua BRENNAN INDUSTRIES suku cadang →
This flareless bite-type steel compression fitting from the D2404 series connects rigid steel tubing with 12 mm OD to 6 mm OD and a 3/8 in pipe thread. It is used in hydraulic and pneumatic systems to create a leak-proof seal in fluid power, instrumentation, and process control lines
BRENNAN INDUSTRIES
This flareless bite-type steel compression fitting from the D2404 series connects rigid steel tubing with 12 mm OD to 6 mm OD and a 3/8 in pipe thread. It is used in hydraulic and pneumatic systems to create a leak-proof seal in fluid power, instrumentation, and process control lines
This steel compression straight fitting connects two 25 mm OD metric tubes with a flareless bite-type seal. Suitable for hydraulic, pneumatic, and lubrication systems in industrial fluid handling
BRENNAN INDUSTRIES
This steel compression straight fitting connects two 25 mm OD metric tubes with a flareless bite-type seal. Suitable for hydraulic, pneumatic, and lubrication systems in industrial fluid handling
BRENNAN INDUSTRIES
BRENNAN INDUSTRIES
Steel tube nut for flareless bite-type compression fittings. Metric M20x1.5 thread size, designed for 12 mm outside diameter tubing. Used in hydraulic and pneumatic systems to secure tube connections under pressure
BRENNAN INDUSTRIES
BRENNAN INDUSTRIES
This steel tube nut is a component of a flareless bite-type compression fitting, designed for 10 mm OD tubing with an M18x1.5 metric thread. It is used in hydraulic and pneumatic systems to secure tubing and create a leak-proof seal in fluid-power applications
BRENNAN INDUSTRIES
BRENNAN INDUSTRIES
Steel cutting ring for flareless bite-type compression fittings, 8 mm outside diameter. Used in hydraulic and pneumatic systems to create a metal-to-metal seal on tubing. Part of the D0319 series
This flareless bite-type steel compression fitting from the D6565-EQUAL series connects two 30 mm OD metric tubes. It is constructed of steel with a Metric x Metric configuration. Typical applications include hydraulic, pneumatic, and lubrication systems in industrial equipment
BRENNAN INDUSTRIES
This flareless bite-type steel compression fitting from the D6565-EQUAL series connects two 30 mm OD metric tubes. It is constructed of steel with a Metric x Metric configuration. Typical applications include hydraulic, pneumatic, and lubrication systems in industrial equipment
This flareless bite-type steel compression tee fitting from the D6600 series features M12x1.5 threads on all three ports and a swivel design. It is used to branch tubing lines in hydraulic and pneumatic systems, forming a leak-tight seal on steel tubing for high-pressure fluid power applications
BRENNAN INDUSTRIES
This flareless bite-type steel compression tee fitting from the D6600 series features M12x1.5 threads on all three ports and a swivel design. It is used to branch tubing lines in hydraulic and pneumatic systems, forming a leak-tight seal on steel tubing for high-pressure fluid power applications
This flareless bite-type steel compression tee fitting joins three tubes at a single point in rigid piping systems. It features three M16x1.5 thread ports and is constructed of rigid steel. Commonly used in industrial fluid power applications requiring leak-free connections
BRENNAN INDUSTRIES
This flareless bite-type steel compression tee fitting joins three tubes at a single point in rigid piping systems. It features three M16x1.5 thread ports and is constructed of rigid steel. Commonly used in industrial fluid power applications requiring leak-free connections