BRIDGEPORT FITTINGS Split Bushing: 3 in Trade Size, 11/16 in Overall Lg
The BRIDGEPORT FITTINGS Split Bushing (MPN SB-388NM) is a 3-inch trade size split insulating bushing. It features an overall length of 11/16 inches and is insulated.
SKU 3G-OTH-05276
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BRIDGEPORT FITTINGS Split Bushing (MPN SB-388NM) is a 3-inch trade size split insulating bushing. It features an overall length of 11/16 inches and is insulated.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a BRIDGEPORT FITTINGS split insulating bushing used for?
A BRIDGEPORT FITTINGS split insulating bushing is used to protect electrical cables from abrasion and damage where they pass through knockout holes in metal enclosures, junction boxes, or panels. The insulated design provides electrical isolation and prevents short circuits. It is commonly installed in industrial, commercial, and residential wiring applications.
What are the specifications of the BRIDGEPORT FITTINGS SB-388NM split bushing?
The BRIDGEPORT FITTINGS SB-388NM is a 3-inch trade size split insulating bushing with an overall length of 11/16 inches. It is insulated and manufactured by BRIDGEPORT FITTINGS. The split design allows installation over existing cables without disconnecting them. The part number is SB-388NM.
Where to buy BRIDGEPORT FITTINGS split bushings worldwide?
BRIDGEPORT FITTINGS split bushings are available to order through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact 3G Electric for pricing and lead time on this SB-388NM bushing.
How to install a BRIDGEPORT FITTINGS split insulating bushing?
To install a BRIDGEPORT FITTINGS split insulating bushing, first ensure the knockout hole is clean and free of burrs. Open the split bushing and place it around the cable, then snap it into the knockout hole. The bushing should seat firmly, providing a smooth, insulated edge. No special tools are required for installation.
Digunakan dalam
Aplikasi umum untuk BRIDGEPORT FITTINGSBRIDGEPORT FITTINGS Produk
3G Electric memasok BRIDGEPORT FITTINGS split insulating bushings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
