BUNTING BEARINGS Sleeve Bearing: Bronze, 7/8 in Bore, 1 1/16 in OD, 2 in Lg, -450°F to 500°F
The BUNTING BEARINGS Sleeve Bearing is a bronze general purpose metallic sleeve bearing with a 7/8 in bore, 1 1/16 in OD, and 2 in length, rated for -450°F to 500°F, sold in a 3 PK (MPN CB141716).
SKU 3G-OTH-110156
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BUNTING BEARINGS Sleeve Bearing is a bronze general purpose metallic sleeve bearing with a 7/8 in bore, 1 1/16 in OD, and 2 in length, rated for -450°F to 500°F, sold in a 3 PK (MPN CB141716).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is BUNTING BEARINGS Sleeve Bearing used for?
This bronze sleeve bearing supports rotating shafts in general-purpose industrial machinery. It handles radial loads in conveyors, pumps, and gearboxes where low-speed, high-load operation occurs. The 3-pack provides spares for maintenance. Its temperature range of -450°F to 500°F suits cryogenic or moderate-heat environments.
What are the specifications of BUNTING BEARINGS Sleeve Bearing CB141716?
The BUNTING BEARINGS CB141716 is a bronze sleeve bearing with a 7/8 in bore, 1 1/16 in OD, and 2 in length. It operates from -450°F to 500°F and comes in a 3-pack. This general-purpose metallic bearing is designed for shaft support in industrial equipment.
Where to buy BUNTING BEARINGS Sleeve Bearing in worldwide?
3G Electric supplies BUNTING BEARINGS sleeve bearings worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on the CB141716 3-pack. As a global industrial distributor since 1990, we source and deliver this bearing to any country.
How to install BUNTING BEARINGS Sleeve Bearing?
Press the bronze sleeve bearing into a properly sized housing bore using an arbor press. Ensure the shaft is clean and lubricated before insertion. Align the bearing bore with the shaft axis to prevent binding. Follow standard press-fit practices for interference fits to avoid distortion.
Digunakan dalam
Aplikasi umum untuk BUNTING BEARINGSBUNTING BEARINGS Produk
3G Electric memasok BUNTING BEARINGS general purpose metallic sleeve bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
