BUNTING BEARINGS Sleeve Bearing: PTFE, J-5500, 1 in Bore, 1 1/4 in OD, 3/4 in Overall Lg
The BUNTING BEARINGS Sleeve Bearing is a PTFE plastic sleeve bearing designed for non-hardened surfaces. This J-5500 series bearing features a 1 in bore, 1 1/4 in OD, and 3/4 in overall length, with a yellow color…
SKU 3G-OTH-98208
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BUNTING BEARINGS Sleeve Bearing is a PTFE plastic sleeve bearing designed for non-hardened surfaces. This J-5500 series bearing features a 1 in bore, 1 1/4 in OD, and 3/4 in overall length, with a yellow color and manufacturer part number BJ5S162006.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a BUNTING BEARINGS PTFE sleeve bearing used for?
This BUNTING BEARINGS PTFE sleeve bearing is used in applications with non-hardened shafts, providing low-friction support and wear resistance. It is common in conveyor systems, packaging machinery, and agricultural equipment where lubrication is difficult or undesirable.
What are the specifications of the BUNTING BEARINGS J-5500 sleeve bearing?
The BUNTING BEARINGS J-5500 sleeve bearing has a 1 in bore, 1 1/4 in OD, and 3/4 in overall length. It is made of PTFE, colored yellow, and carries the manufacturer part number BJ5S162006. It is designed for non-hardened surfaces.
Where to buy BUNTING BEARINGS sleeve bearings worldwide?
3G Electric supplies BUNTING BEARINGS sleeve bearings worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this J-5500 series bearing.
How to install a BUNTING BEARINGS PTFE sleeve bearing?
Ensure the housing bore is clean and free of burrs. Press the bearing into place using an arbor press, applying force only to the outer ring. Avoid hammering. For non-hardened shafts, verify shaft finish meets manufacturer recommendations to prevent premature wear.
Digunakan dalam
Aplikasi umum untuk BUNTING BEARINGSBUNTING BEARINGS Produk
3G Electric memasok BUNTING BEARINGS plastic sleeve bearing for non-hardened surfaces. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.















