BURNDY Wire Connector: 4 AWG – 1 AWG Wire Sizes, 3/8 in Stud Size
The BURNDY Q2A1C2 is a straight mechanical lug made from unplated copper, designed for copper wire. It accommodates stranded copper wire sizes from 4 AWG minimum to 1 AWG maximum and features a 3/8 in stud size.
SKU 3G-OTH-16252
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BURNDY Q2A1C2 is a straight mechanical lug made from unplated copper, designed for copper wire. It accommodates stranded copper wire sizes from 4 AWG minimum to 1 AWG maximum and features a 3/8 in stud size.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the BURNDY Q2A1C2 wire connector used for?
The BURNDY Q2A1C2 is a straight mechanical lug used to terminate or splice stranded copper wire in electrical power distribution, panel building, and industrial control applications. It accommodates 4 AWG to 1 AWG wire and is suitable for high-current connections where a reliable, reusable copper termination is required.
What are the specifications of the BURNDY Q2A1C2?
The BURNDY Q2A1C2 is a straight mechanical lug with an unplated copper body. It accepts stranded copper wire from 4 AWG minimum to 1 AWG maximum and has a 3/8 in stud size. The manufacturer part number is Q2A1C2, and it is designed for copper wire only.
Where to buy the BURNDY Q2A1C2 worldwide?
3G Electric supplies the BURNDY Q2A1C2 straight mechanical lug to customers worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your site. Contact 3G Electric for pricing and lead time on this unplated copper lug.
How to install the BURNDY Q2A1C2 mechanical lug?
Strip the stranded copper wire to the recommended length, insert it fully into the lug barrel, and tighten the set screw(s) to the torque specified by BURNDY. Ensure the 3/8 in stud is clean and the lug seats flat against the bus bar. Always follow NEC and manufacturer guidelines for safe installation.
Digunakan dalam
Aplikasi umum untuk BURNDYBURNDY Produk
3G Electric memasok BURNDY straight mechanical lugs. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
