BURNDY Wire Connector: 14 AWG – 8 AWG Wire Sizes, #10 Stud Size
The BURNDY KA8C is a straight mechanical lug made from unplated copper, designed for copper wire. It accommodates stranded copper wire sizes from 14 AWG minimum to 8 AWG maximum and features a #10 stud size.
SKU 3G-OTH-16771
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BURNDY KA8C is a straight mechanical lug made from unplated copper, designed for copper wire. It accommodates stranded copper wire sizes from 14 AWG minimum to 8 AWG maximum and features a #10 stud size.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the BURNDY KA8C wire connector used for?
The BURNDY KA8C is a straight mechanical lug used to terminate or splice copper wire in electrical panels, switchgear, and industrial equipment. It is suitable for stranded copper wire from 14 AWG to 8 AWG and fits a #10 stud, making it common in power distribution and control circuits.
What are the specifications of the BURNDY KA8C?
The BURNDY KA8C accommodates stranded copper wire from 14 AWG minimum to 8 AWG maximum. It has an unplated copper lug body and is designed for a #10 stud size. The manufacturer part number is KA8C, and it is intended for copper wire only.
Where to buy the BURNDY KA8C worldwide?
3G Electric supplies the BURNDY KA8C worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time; we source and deliver this connector to any country.
How to install the BURNDY KA8C mechanical lug?
Strip the copper wire to the recommended length, insert it fully into the lug barrel, and tighten the set screw to the torque specified by BURNDY. Ensure the wire is clean and the stud hole aligns with the #10 stud. Always follow NEC guidelines and use a calibrated torque tool.
Digunakan dalam
Aplikasi umum untuk BURNDYBURNDY Produk
3G Electric memasok BURNDY straight mechanical lugs. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
