CALBRITE Conduit Hanger Clamp, Split-Ring: 2 in Trade Size
The CALBRITE Conduit Hanger Clamp, Split-Ring (SKU 36HX34, model S62000SP00) is a hanger for conduit and pipe made of 316 Stainless Steel with a polished finish. It is designed for a 2 in trade size and compatible…
SKU 3G-OTH-04719
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The CALBRITE Conduit Hanger Clamp, Split-Ring (SKU 36HX34, model S62000SP00) is a hanger for conduit and pipe made of 316 Stainless Steel with a polished finish. It is designed for a 2 in trade size and compatible with IMC and RMC conduit, as well as 2 in nominal pipe. This clamp meets Federal Specifications WW-H-171, supports indoor/outdoor usage, and mounts horizontally on a wall with an overall width of 5/8 in, height of 2-7/8 in, and length of 3-29/32 in.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the CALBRITE Conduit Hanger Clamp, Split-Ring used for?
The CALBRITE Conduit Hanger Clamp, Split-Ring is used to securely support 2-inch IMC or RMC conduit and 2-inch nominal pipe in industrial, commercial, and outdoor electrical installations. Its 316 stainless steel construction and polished finish make it suitable for corrosive environments, and it meets Federal Specification WW-H-171 for reliable performance.
What are the specifications of the CALBRITE S62000SP00 conduit hanger clamp?
The CALBRITE S62000SP00 is a split-ring hanger clamp for 2-inch trade size IMC and RMC conduit. It is made of 316 stainless steel with a polished finish, measures 5/8 in wide by 2-7/8 in high by 3-29/32 in long, with a steel thickness of 0.25 in. It mounts horizontally on a wall and is rated for indoor/outdoor use, complying with Federal Specification WW-H-171.
Where to buy CALBRITE conduit hanger clamps worldwide?
You can source the CALBRITE Conduit Hanger Clamp, Split-Ring (SKU 36HX34) from 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide locations. Contact us for availability and lead time; we supply genuine CALBRITE products to support your project needs.
How to install a CALBRITE split-ring conduit hanger clamp?
To install the CALBRITE split-ring clamp, first open the ring by loosening the screw. Position the clamp around the 2-inch IMC or RMC conduit or pipe, then tighten the screw to secure it. Mount the clamp horizontally on a wall using appropriate fasteners (not included). Ensure the clamp is fully seated and the conduit is supported per local codes.
Digunakan dalam
Aplikasi umum untuk CALBRITECALBRITE Produk
3G Electric memasok CALBRITE hangers for conduit & pipe. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
