Honeywell Gas block VK 4115 V 1014 U

VK41..V/VK81..V SERIES GAS CONTROLS WITH INTEGRATED 1:1 GAS/AIR REGULATOR FOR COMBINED VALVE AND IGNITION SYSTEM INSTRUCTION SHEET DESCRIPTION VK41..V/VK81..V gas controls perform all the functions required to safely regulate gas flow to the main burner of domestic central heating equipment, warm air furnaces, back boilers and water heaters. VK41..V/VK81..V gas controls hold a first electric on/off direct operator for opening the safety valve of class A or B according to EN161 and a second electric on/off servo operator of class B or C to EN 161. The pressure regulator is in accordance with class B requirement of EN 88. VK41..V/VK81..V gas controls can handle the three gas families, manufactured gas, natural gas and LP gas. SPECIFICATIONS Models VK41.0 series: line voltage gas control with pilot burner connection, two automatic shut off valves and pilot burner connection for direct spark APPLICATION ignition (DSI) or hot surface ignition (HSI) applications, The VK41..V/VK81..V series gas controls with 1:1 gas/air VK41.5 series: line voltage gas control without pilot burner regulator have been developed for application in domestic connection, two automatic shut off valves for appliances with premix burners and automatic ignition. direct spark ignition (DSI) or hot surface For this system, the VK41..V series gas controls have been ignition (HSI) applications, VK81.0 series: low voltage gas control with pilot burner designed to have the S4565 series ignition control attached directly onto the valve. connection, two automatic shut off valves for direct spark ignition (DSI) or hot surface The combined system then provides programmed safe light ignition (HSI) applications, up, flame supervision and regulation of gas flow to the main VK81.5 series: low voltage gas control without pilot burner burner of the appliance. connection, two automatic shut off valves for The VK41..V/VK81..V series can as well be used as stand direct spark ignition (DSI) or hot surface alone in direct burner applications. The plug (order number ignition (HSI) applications, Subject to change without notice. All rights reserved 45.900.441-) with integrated rectifier circuit then has to be Suffix letter used. V: fast opening, with integrated 1 : 1 gas/air regulation The VK41..V/VK81..V series are used in a system context in Main gas connection conjunction with fan control and a direct spark ignition (DSI) See table 1. and table 2. control. 3 /8” and 1/2” straight or elbow flanges are according to the The VK41..V/VK81..V series are approved in accordance torsion and bending stress of EN 126 group 2 with european standards. Connections with G 1/2” or G 3/4” external thread fitted with nuts according to ISO 228-1 in combination with applicable sealing(s) withstand the torsion and bending stress of EN 126 group 1 Side outlet (optional) and end outlet (flanged version) can be fitted direct to a burner manifold. Pilot gas connection (where applicable) Standard at end outlet: M8 x 1 for 4 mm outer diameter tubing. 1 EN1R-9134 0202R10-NE  Side outlet 37 95 68 Pressure tab 9 24 34 Cap screw/offset adjustment 24 84 Side outlet (optional) Hole j 2.6 mm to connect ignition control Air pressure Pilot outlet M8 x 1-6H connection for 4 mm tubing 29 91 87 76 24 24 37 37 25 24 17 24 Outlet Inlet Molex 1.1 pin header 18 65 30 29 8 Mounting hole (2) for tapping 105 screws 3.9 DIN 7990 115 Fig. 1. Dimensional drawing Ambient temperature Minimum regulation capacity 0 ... 60°C for combined valve and ignition control 0.5 m3/h air at ∆p=0,5 mbar across main burner orifice at 0 ... 70°C for stand alone valve 30 mbar operating pressure maximum Dimensions 0.7 m3/h air at ∆p=0,5 mbar across main burner orifice at 60 mbar operating pressure maximum See fig. 1. Minimum operating gas pressure Pressure…