Danfoss Dehydrator DML 052

MAKING MODERN LIVING POSSIBLE Data sheet ELIMINATOR® liquid line filter drier Types DCL and DML All ELIMINATOR® driers have a solid core with binding material held to an absolute minimum. There are two types of ELIMINATOR® cores. Type DML driers have a core composition of 100% Molecular Sieve, while type DCL contain 80% Molecular Sieve with 20% activated alumina. ELIMINATOR® type DML driers are designed for applications requiring the highest moisture capacity. ELIMINATOR® type DCL driers are designed for applications requiring high moisture capacity and acid adsorption capacity. Available with solder (pure copper) and flare connections. Features The Core type DML The Shell yy 100% 3Å Molecular Sieve core. yy UL approved for PS/MWP up to yy High drying capacity minimizing the risk 46 bar/667 psig, of acid formation (hydrolysis). yy Available with solder (pure copper) and flare yy Recommended for use with HC, HFC and HCFC connections, refrigerants, yy Corrosion resistant powder-painted finish. yy Will not deplete oil additives. Special coating for marine applications available upon request, The Core type DCL yy Allows installation with any orientation provided the arrow is in the flow direction, yy 80% 3Å Molecular Sieve with 20% activated yy Available in sizes from 3 – 75 cubic inches. alumina, yy Perfect core blend for systems that operate at The Filter high condensing temperatures and require high drying capacity, yy 25 µm (0.001 in.) filter provides high retention yy Recommended for use with HC, HFC and HCFC with minimal pressure drop, refrigerants. yy Thermally stable up to 120 °C. Approvals UL file no. SA 6398 Compliant with ATEX hazard zone 2 PED 97/23/EC - a3p3 Note: Only solder versions (cu-plated/pure copper) and connection sizes below 25mm are approved for flammable refrigerants now. Data sheet ELIMINATOR® liquid line filter drier, types DCL and DML Introduction ELIMINATOR® liquid line filter driers With these contaminants eliminated, systems protectrefrigeration and air-conditioning are safer from harmful chemical reactions systems from moisture, acids, and solid particles. and from abrasive impurities. Danfoss R64-2107.10 AKS EKC EVR TCAE SGN GBC GBC DML/DCL Technical data Surface and volume Solid core Solid core Filter drier volume Filter drier volume Filter surface volume (shell volume) (net volume) [cm2] [cm3] [l] [l] DML/DCL 03 82 41 0.08 0.038 DML/DCL 05 95 67 0.12 0.051 DML/DCL 08 131 104 0.17 0.065 Flare connection DML/DCL 16 220 234 0.36 0.122 DML/DCL 30 378 494 0.72 0.224 DML/DCL 41 510 681 0.97 0.286 DML/DCL 60 756 988 1.34 0.352 DML/DCL 75 1019 1363 1.81 0.450 Solder connection Acid capacity (pure copper) Acid capacity 1) Temperature range Filter [g] -40 – 70 °C (-40 – 160 °F) DCL 03 0.58 DCL 05 0.87 Maximum working pressure PS 46 bar DCL 08 1.36 DCL 16 3.12 DCL 30 6.40 DCL 41 8.90 DCL 60 12.80 DCL 75 17.80 1) Adsorption capacity of oleic acid at 0.05 TAN (Total Acid Number). Data sheet ELIMINATOR® liquid line filter drier, types DCL and DML Technical data and capacities Drying and liquid capacity, type DML Drying capacity [kg] refrigerant 1) Liquid capacity [kW] 2) R134a R404A R507 R22 R407C R410A R32 Type [°C] R134a R404A R507 R22 R407C R410A R32 24 52 24 52 24 52 24 52 24 52 24 52 24 52 DML 032/032s 5.0 4.7 5.3 5.1 5.4 5.0 5.0 4.7 5.0 4.6 4.5 4.2 4.6 4.2 6.70 5.01 4.86 7.45 7.09 7.43 10.86 DML 032.5s 5.0 4.7 5.3 5.1 5.4 5.0 5.0 4.7 5.0 4.6 4.5 4.2 4.6 4.2 9.59 6.97 6.75 10.52 9.97 10.31 15.10 DML 033/033s 5.0 4.7 5.3 5.1 5.4 5.0 5.0 4.7 5.0 4.6 4.5 4.2 4.6 4.2 12.85 9.86 9.57 14.46 13.84 14.67 21.40 DML 034s 5.0 4.7 5.3 5.1 5.4 5.0 5.0 4.7 5.0 4.6 4.5 4.2 4.6 4.2 24.71 20.12 19.57 28.60 27.65 30.13 43.78 DML 052/052s 7.9 7.5 8.5 8.1 8.6 8.0 8.0 7.4 7.9 7.3 7.2 6.6 7.3 6.7 7.67 5.62 5.45 8.45 8.02 8.32 12.18 DML 052.5s 7.9 7.5 8.5 8.1 8.6 8.0 8.0 7.4 7.9 7.3 7.2 6.6 7.3 6.7 9.58 7.01 6.80 10.54 10.01 10.38 15.19 DML 053/053s 7.9 7.5 8.5 8.1 8.6 8.0 8.0 7.4 7.9 7.3 7.2 6.6 7.3 6.7 12.87 9.81 9.52 14.44 13.80 14.58 21.28 DML 054s 7.9 7.5 8.5 8.1 8.6 8.0 8.0 7.4 7.9 7.3 7.2 6.6 7.3 6.7 25.70 20.77 20.19 29.64 28.62 31.07 45.17 DML 055s 7.9 7.5 8.5 8.1 8.6 8.0 8.0 7.4 7.9 7.3 7.2 6.6 7.3 6.7 36.22 29.07 28.25 41.63 40.15 43.45 63.19 DML 082/082s 12.6 11.9 13.6 12.9 13.8 12.8 12.8 11.8 12.7 11.7 11.5 10.6 11.7 10.8 7.68 5.44 5.27 8.32 7.85 8.02 11.77 DML 082.5s 12.6 11.9 13.6 12.9 13.8 12.8 12.8 11.8 12.7 11.7 11.5 10.6 11.7 10.8 10.53 7.84 7.61 11.69 11.13 11.63 17.01 DML 083/083s 12.6 11.9 13.6 12.9 13.8 12.8 12.8 11.8 12.7 11.7 11.5 10.6 11.7 10.8 14.19 10.98 10.66 16.03 15.37 16.35 23.85 DML 084/084s 12.6 11.9 13.6 12.9 13.8 12.8 12.8 11.8 12.7 11.7 11.5 10.6 11.7 10.8 28.61 21.33 20.68 31.76 30.24 31.63 46.24 DML 085/085s 12.6 11.9 13.6 12.9 13.8 12.8 12.8 11.8 12.7 11.7 11.5 10.6 11.7 10.8 43.81 35.32 34.33 50.47 48.71 52.83 76.81 DML 162/162s 27.7 26.2 29.8 28.3 30.4 28.0 28.1 26.0 27.8 25.7 25.3 23.3 25.6 23.6 7.68 5.43 5.26 8.31 7.85 8.01 11.75 DML 162.5s 27.7 26.2 29.8 28.3 30.4 28.0 28.1 26.0 27.8 25.7 25.3 23.3 25.6 23.6 10.57 7.36 7.12 11.36 10.69 10.83 15.91 DML 163/163s 27.7 26.2 29.8 28.3 30.4 28.0 28.1 26.0 27.8 25.7 25.3 23.3 25.6 23.6 16.33 11.18 10.82 17.41 16.33 16.43 24.16 DML 164/164s 27.7 26.2 29.8 28.3 30.4 28.0 28.1 26.0 27.8 25.7 25.3 23.3 25.6 23.6…