Danfoss Dehydrator DCL 082S

Data Sheet Hermetic filter drier Type DML and DCL For uniflow liquid line All ELIMINATOR® driers have a solid core with binding material held to an absolute minimum. There are two types of ELIMINATOR® cores. Type DML driers have a core composition of 100% Molecular Sieve, while type DCL contain 80% Molecular Sieve with 20% activated alumina. ELIMINATOR® type DML driers are designed for applications requiring the highest moisture capacity. ELIMINATOR® type DCL driers are designed for applications requiring high moisture capacity and acid adsorption capacity. Available with solder (cu-plated steel connectors) and flare connections. For other connections please contact your Danfoss Sales Representative. AI192386435941en-001401 Hermetic filter drier Type DML and DCL Features The Core type DML • 100% Molecular Sieve core • High drying capacity minimizing the risk of acid formation (hydrolysis) The Core type DCL • 80% Molecular Sieve with 20% activated alumina • Perfect core blend for systems that operate at high condensing temperatures and require high drying capacity The Shell • PED approved for PS 46 bar • Available with solder (Cu-plated steel connectors) and flare connections • Corrosion resistant powder-painted finish. Special coating for marine applications available upon request • Allows installation with any orientation provided the arrow is in the flow direction • Available in sizes 3 – 75 cubic inches The Filter • 25 μm (0.001 in.) filter provides high retention with minimal pressure drop • Thermally stable up to 120 °C © Danfoss | Climate Solutions | 2021.03 AI192386435941en-001401 | 2 Hermetic filter drier Type DML and DCL Application Intro-diagram ELIMINATOR® Hermetic filter driers protect refrigeration and air-conditioning systems from moisture, acids, and solid particles. With these contaminants eliminated, systems are safer from harmful chemical reactions and from abrasive impurities. Figure 1: Application Danfoss R64-2107.10 AKS EKC EVR TCAE SGN GBC DML / DCL GBC DML Filter drier Recommended for use with R134a, R404A, R32,R410A,R407C, R23, R600, R600a,R1234yf, R1234ze, R407f,R290, R452A,R444B, R449A, R448A and R450A refrigerants. Will not deplete oil additives DCL Filter Drier Recommended for use with Applicable to R22, R134a, R404A, R32,R410A, R407C, R23, R600, R600a,R1234yf, R1234ze, R407f, R290, R452A,R444B, R449A, R448A and R450A refrigerants © Danfoss | Climate Solutions | 2021.03 AI192386435941en-001401 | 3 Hermetic filter drier Type DML and DCL Product specification Technical data Table 1: Technical data Flare connection Solder connection(cu-plated steel connectors) Table 2: Surface and volume Filter drier volume (shell vol‐ Filter drier volume (net vol‐ Filter Solid core surface[cm2] Solid core volume[cm3] ume)[l] ume)[l] DML/DCL 03 82 29 0.08 0.051 DML/DCL 05 95 35 0.12 0.085 DML/DCL 08 131 56 0.17 0.114 DML/DCL 16 220 134 0.36 0.226 DML/DCL 30 378 256 0.72 0.464 DML/DCL 41 510 350 0.97 0.62 DML/DCL 60 756 513 1.34 0.827 DML/DCL 75 1019 702 1.81 1.108 Table 3: Acid capacity Filter Acid capacity(1) [g] DCL 03 0.5 DCL 05 0.8 DCL 08 1.3 DCL 16 2.9 DCL 30 6.1 DCL 41 8.3 DCL 60 12.2 DCL 75 16.6 (1) Adsorption capacity of oleic acid at 0.05 TAN (Total Acid Number). Temperature range: -40 – 70 °C Maximum working pressure: PS 46 bar Conversions [1 kg of refrigerant × (Initial PPM of water − Final PPM of water)] Drops of water = 50 See ARI standard 710-86 for recommended initial and final PPM values for different refrigerants. Identification Table 4: Identification Type Codes Description Filter drier D Drier C 80% Molecular Sieve / 20% activated alumina Solid core M 100% Molecular Sieve core Application L Liquid line © Danfoss | Climate Solutions | 2021.03 AI192386435941en-001401 | 4 Hermetic filter drier Type DML and DCL Type Codes Description 3 3 in.3 5 5 in.3 8 8 in.3 16 16 in.3 Size (volume) 30 30 in.3 38 38 in.3 41 41 in.3 60 60 in.3 75 75 in.3 2 1⁄4 in. / 6 mm 2.5 5⁄16 in. / 8 mm 3 3⁄8 in. / 10 mm Connection (filter connection in 1⁄8 of an inch incre- 4 1⁄2 in. / 12 mm ments) 5 5⁄8 in. / 16 mm 6 3⁄4 in. / 18 (19) mm 7 7⁄8 in. / 22 mm 9 11⁄8 in. / 28 mm (blank) Flare connection Connection type s Solder connection Example for type codes D C L 05 3 s D Filter drier C Solid core L Application 05 Size (volume) 3 Connection (filter connection in 1⁄8 of an inch increments) s Connection type Selection Type selection is made considering the application Table 5: Selection Refrigerant and oil types DCL DML HFO Recommended Recommended HC (1) Recommended Recommended Refrigerant HFC Recommended Recommended HCFC Recommended Recommended Mineral or AB Recommended Recommended Oil POE or PAG, pure Recommended Recommended…