CBM Electrode 4 in 1400 BSP G1/2 LG 1400 mm
CBM ELC | Electrode 4 en 1400 BSP G1/2 LG 1400 mm
SKU 3G-CBM-02604
Juga terdaftar sebagai: ELC 07022 · ELC-07022
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Local availability & support — Indonesia
- Phone
- +65 8878 8355
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
CBM ELC | Electrode 4 en 1400 BSP G1/2 LG 1400 mm
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the CBM Electrode 4 in 1400 BSP G1/2 LG 1400 mm used for?
This CBM electrode is used for level sensing or conductivity measurement in industrial boilers, water tanks, and process vessels. It detects water or liquid presence by completing an electrical circuit through the conductive medium, commonly applied in steam generators and water treatment systems.
What are the specifications of the CBM Electrode 4 in 1400 BSP G1/2 LG 1400 mm?
The CBM electrode has a length of 1400 mm, a BSP G1/2 thread connection, and a 4-electrode configuration. It is designed for use with CBM level controllers and compatible with water conductivity ranges typical in boiler applications. Exact electrical ratings should be confirmed with the controller manual.
Where to buy the CBM Electrode 4 in 1400 BSP G1/2 LG 1400 mm in Singapore?
You can source the CBM Electrode 4 in 1400 BSP G1/2 LG 1400 mm through 3G Electric in Singapore. We handle logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this electrode.
How to install the CBM Electrode 4 in 1400 BSP G1/2 LG 1400 mm?
Install the CBM electrode by threading it into a matching BSP G1/2 boss on the vessel or pipe. Ensure the electrode tip is fully immersed in the conductive liquid. Tighten to the recommended torque and connect wiring per the CBM controller diagram. Avoid overtightening to prevent thread damage.
Digunakan dalam
Aplikasi umum untuk CBMCBM Produk
3G Electric memasok CBM ignition & transformers. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
Anda mungkin juga membutuhkan
Related products
- BUSSMANN Three-phase surge protective device for DIN-rail mounting. Rated 20 kA nominal discharge current, 3 poles, for 120/208 VAC 3-phase Wye systems. Used in electrical panels to protect against voltage transients in industrial and commercial power distribution
- BUSSMANN Plug-in mount circuit breaker from the CB212 series, featuring a Type II footprint and blade terminal connection. Rated for 14V DC with an interrupt rating of 150 A at 14V DC. Used to protect automotive electrical circuits from overloads and short circuits in vehicles, trucks, and marine applications
- BUSSMANN Plug-in mount circuit breaker from the CB212 series, rated 14V DC with an interrupt rating of 225 A at 14V DC. Features blade terminal connections and a Type II footprint design. Suitable for protecting automotive electrical circuits from overloads and short circuits
- BUSSMANN Plug-in mount circuit breaker for 14V DC automotive systems. Type II footprint with blade terminal connection. Interrupt rating 225 A at 14V DC. Provides overcurrent protection in vehicle electrical circuits
- BUSSMANN Plug-in mount automotive circuit breaker with blade terminal connection. Type II ATC footprint design for overcurrent protection in 12V DC electrical systems. Rated to interrupt 225 A at 14V DC. Suitable for automotive applications requiring resettable circuit protection
- BUSSMANN Single-pole surge protective device for DIN rail internal mounting. Rated 120/240VAC with 20 kA nominal discharge current and 1200V voltage protection rating. Used in electrical distribution systems to limit transient overvoltages
