ELV Membran EPDM untuk katup ELV15016
Membran EPDM untuk katup ELV15016
SKU 3G-CBM-03365
Juga terdaftar sebagai: ELV 91508 · ELV-91508
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Local availability & support — Indonesia
- Phone
- +65 8878 8355
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
Membran EPDM untuk katup ELV15016
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ELV EPDM membrane for ELV15016 valves used for?
The ELV EPDM membrane is a replacement diaphragm for ELV15016 solenoid valves. It is used in industrial fluid-control systems, including water treatment and chemical processing, where EPDM elastomer provides resistance to heat, ozone, and mild chemicals. This part restores valve sealing performance without replacing the entire valve assembly.
What are the specifications of the ELV EPDM membrane for ELV15016 valves?
The ELV EPDM membrane is designed specifically for ELV15016 solenoid valves. It is made from EPDM rubber, which offers good resistance to hot water, steam, and diluted acids. The membrane acts as the sealing diaphragm that opens and closes the valve port. For exact dimensions and pressure ratings, refer to the ELV15016 valve datasheet.
Where to buy the ELV EPDM membrane for ELV15016 valves in Singapore?
3G Electric supplies the ELV EPDM membrane for ELV15016 valves to Singapore. We source this genuine ELV replacement part and handle logistics, customs clearance, and delivery to your facility. Contact our technical sales team for pricing and lead time. We support local engineers with product selection and application advice.
How to install the ELV EPDM membrane on an ELV15016 valve?
To install the ELV EPDM membrane, first depressurize and isolate the valve. Remove the valve bonnet or actuator, then carefully extract the old diaphragm. Clean the sealing surfaces, place the new membrane in the correct orientation, and reassemble the bonnet to the manufacturer's torque specification. Always test for leaks after installation.
Digunakan dalam
Aplikasi umum untuk ELVELV Produk
3G Electric memasok ELV solenoid valves. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
